APPLICABLE STANDARD
OPERATING
STORAGE
-55C TO 85C(NOTE 1)
30V AC/DC
-10C TO 60C
TEMPERATURE RANGE
TEMPERATURE RANGE
APPLICABLE
CONNECTOR
RATING
VOLTAGE
DF40GB(*)-10DS-0.4V(**)
CURRENT
0.3A
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
CONFIRMED VISUALLY.
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
INSULATION RESISTANCE
VOLTAGE PROOF
20mV AC OR LESS 1khz,1m A .
90m MAX.
X
X
X
-
-
-
100V DC.
50M MIN.
100V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION 30TIMES INSERTIONS AND EXTRACTIONS.
① CONTACT RESISTANCE: 90m MAX.
② NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
X
X
-
-
VIBRATION
SHOCK
FREQUENCY 10 TO 55 TO 10 Hz,APPROX 5min,
SINGLE AMPLITUDE 0.75 mm,10CYCLES,
FOR 3 DIRECTIONS.
490 m/s2 DURATION OF PULSE 11 ms AT 3 TIMES
① NO ELECTRICAL DISCONTINUITY OF 1 s.
② NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
① NO ELECTRICAL DISCONTINUITY OF 1 s.
② NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
FOR 3 DIRECTIONS.
X
-
ENVIRONMENTAL CHARACTERISTICS
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55→ 5 TO 35→85→ 5 TO 35 C
① CONTACT RESISTANCE: 90m MAX.
② INSULATION RESISTANCE: 50M MIN.
③ NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
X
X
TIME 30→ 5 MAX → 30→ 5 MAX min
UNDER 5 CYCLES.
-
-
DAMP HEAT
(STEADY STATE)
EXPOSED AT 40 ± 2 C, 90 TO 95 , 96 h.
① CONTACT RESISTANCE: 90m MAX.
② INSULATION RESISTANCE: 25M MIN.
③ NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
SULPHUR DIIOXIDE
EXPOSED IN 25 PPM FOR 96h,25℃,75%.
① CONTACT RESISTANCE: 180m MAX.
② NO DAMAGE, CRACK OR LOOSENESS OF
PARTS.
X
X
X
-
-
-
HEAT RESISTANCE OF
SOLDERING
RECOMMENDED TEMPERATURE PROFILE
SOLDERING AREA
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
MAX 250℃, 220℃ FOR 60 SECONDS MAX.
PREHEATING AREA
150 TO 180℃ 90 TO 120SECONDS.
MAXIMUM TWICE ACTION IS ALLOWED UNDER THE
SAME CONDITION.
RECOMMENDED MANUAL SOLDERING CONDITION
SOLDERING IRON TEMPERATURE 350℃.
SOLDERING TIME: WIHTIN 3 SECONDS.
SOLDERABILITY
COUNT
A NEW UNIFORM COATING OF SOLDER
SHALL COVER MINIMUM OF 95% OF THE
SURFACE BEING IMMERSED.
SOLDERING TEMPERATURE: 245±5℃
DURATION OF IMMERSION: SOLDERING FOR 3
±0.5 SECONDS.
X
-
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
REMARKS
APPROVED
CHECKED
DESIGNED
DRAWN
MO.ISHIDA
15.07.01
15.07.01
15.07.01
15.07.01
NOTE1: INCLUDE THE TEMPERATURE RISING BY CURRENT
TS.MIYAZAKI
SH.HOSODA
KR.AJITO
Unless otherwise specified, refer to JIS C 5402, IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-359672-58-01
DF40GB-10DP-0.4V(58)
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL684-4225-5-58
FORM HD0011-2-1