APPLICABLE STANDARD
OPERATING
STORAGE
-35 C TO +85C (NOTE1)
-10 C TO +60C (NOTE3)
TEMPERATURE RANGE
TEMPERATURE RANGE
STORAGE
HUMIDITY RANGE
OPERATING
RATING
40% TO 80% (NOTE2)
40% TO 70% (NOTE3)
HUMIDITY RANGE
VOLTAGE
APPLICABLE
CONNECTOR
DF19#-*P-1H(##)
DF19-*P-1V(##)
100 V AC/DC
APPLICABLE
CABLE
THIN COAXIAL CABLE
36AWG, 40AWG
36AWG : 0.5A/pin
40AWG : 0.3A/pin
CURRENT
SPECIFICATIONS
TEST METHOD
ITEM
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
ELECTRIC CHARACTERISTICS
CONTACT RESISTANCE
100 mA (DC OR 1000Hz)
80m MAX.
X
-
INSULATION RESISTANCE
100 V DC.
500 M MIN.
X
X
-
-
VOLTAGE PROOF
300 V AC FOR 1 min.
NO FLASHOVER OR BREAKDOWN.
MECHANICAL CHARACTERISTICS
MECHANICAL OPERATION
30 TIMES INSERTIONS AND EXTRACTIONS.
1) CONTACT RESITANCE:
NO VARIATION OF 50mΩ OR MORE FROM INITIAL
VALUE.
X
-
2) NO DAMAGE, CRACK OR LOOSENESS OF PARTS.
1) ELECTRICAL DISCONTINUITY OF 1 µs.
2) NO DAMAGE, CRACK OR LOOSENESS OF PARTS.
VIBRATION
SHOCK
FREQUENCY 10 TO 55 Hz, SINGLE AMPLITUDE
0.75 mm, AT 2h FOR 3 DIRECTION.
490 m/s2 DURATION OF PULSE 11 ms AT 3 TIMES
FOR 3 DIRECTIONS.
X
X
-
-
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT(STEADY
EXPOSED AT 40±2℃ , 90 TO 95 %, 96 h.
(AFTER LEAVING THE ROOM TEMPERATURE FOR 1
TO 2h.)
1) CONTACT RESITANCE:
STATE)
NO VARIATION OF 50mΩ OR MORE FROM INITIAL VALUE.
2) INSULATION RESISTANCE: 500 M MIN.
3) NO DAMAGE, CRACK OR LOOSENESS OF PARTS.
1) CONTACT RESITANCE:
X
X
-
-
RAPID CHANGE OF
TEMPERATURE
TEMPERATURE -55℃→ +85℃
TIME
30min→ 30min
NO VARIATION OF 50mΩ OR MORE FROM INITIAL VALUE.
2) INSULATION RESISTANCE: 500 M MIN.
3) NO DAMAGE, CRACK OR LOOSENESS OF PARTS.
UNDER 5 CYCLES.
(THE TRANSFERRING TIME OF THE TANK IS
2 TO 3 min)
(AFTER LEAVING THE ROOM TEMPERATURE FOR 1
TO 2h.)
RESISTANCE TO
SOLDERING HEAT
【RECOMMENDED TEMPERATURE PROFILE】
SOLDER TEMPERATURE , 260℃
FOR IMMERSION, DURATION, 10s
SOLDERING TEMPERATURE : 245℃
NO DEFORMATION OF CASE OF EXCESSIVE
LOOSENESS OF THE TERMINALS.
X
X
-
-
SOLDERABILITY
A NEW UNIFORM COATING OF SOLDER SHALL
DURATION OF IMMERSION : SOLDERING, FOR 2s COVER MINIMUM OF 95% OF THE SURFACE BEING
IMMERSED.
REMARKS
NOTE 1: INCLUDE THE TEMPERATURE RISING BY CURRENT.
NOTE2: NO CONDENSING
NOTE3: APPLY TO THE CONDITION OF LONG TERM STORAGE FOR UNUSED PRODUCTS BEFORE MOUNTED ON PCB. AFTER MOUNTED ON PCB,
OPERATING TEMPERATURE AND HUMIDITTY RANGE IS APPLIED FOR INTERIM STRAGE DURING TRANSPORTATION.
COUNT
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
0
△
APPROVED
CHECKED
DESIGNED
DRAWN
HS.OKAWA
TS.KUMAZAWA
HK.HAYASHI
20200313
20200313
20200313
20200306
Unless otherwise specified, refer to IEC 60512.
DS.HIROWATARI
Note QT: Qualification Test AT: Assurance Test X:Applicable Test
DRAWING NO.
ELC-306221-06-00
DF19G-*S-1SD(06)
PART NO.
CODE NO.
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL685
FORM HD0011-2-1