DDU222C
Ò
5-TAP, HCMOS-INTERFACED
FIXED DELAY LINE
(SERIES DDU222C)
data
delay
3
devices, inc.
FEATURES
PACKAGES
·
·
·
·
·
Five equally spaced outputs
Very narrow device (SIP package)
Stackable for PC board economy
Input & outputs fully CMOS interfaced & buffered
10 T2L fan-out capability
1 2 3 4 5 6 7 8
VCC IN T1 T2 T3 T4 T5 GND
DDU222F-xx Commercial
DDU222F-xxM Military
FUNCTIONAL DESCRIPTION
PIN DESCRIPTIONS
The DDU222C-series device is a 5-tap digitally buffered delay line. The
signal input (IN) is reproduced at the outputs (T1-T5), shifted in time by an
amount given by the device dash number. For dash numbers less than
40, the total delay of the line is measured from T1 to T5, with the nominal
value given by the dash number. The nominal tap-to-tap delay increment
IN
Signal Input
T1-T5 Tap Outputs
VDD +5 Volts
GND Ground
is given by 1/4 of this number. The inherent delay from IN to T1 is nominally 8.0ns. For dash numbers
greater than or equal to 40, the total delay of the line is measured from IN to T5, with the nominal value
given by the dash number. The nominal tap-to-tap delay increment is given by 1/5 of this number.
SERIES SPECIFICATIONS
DASH NUMBER SPECIFICATIONS
Part
Number
Total
Delay Per
Tap (ns)
2.5 ± 1.0
·
·
·
·
Minimum input pulse width: 40% of total delay
Output rise time: 8ns typical
Supply voltage: 5VDC ± 5%
Supply current: ICCL = 40ma typical
ICCH = 10ma typical
Operating temperature: 0° to 70° C
Temp. coefficient of total delay: 300 PPM/°C
Delay (ns)
10 ± 2.0 *
20 ± 2.0 *
50 ± 3.0
60 ± 3.0
75 ± 4.0
100 ± 5.0
125 ± 6.5
150 ± 7.5
175 ± 8.0
200 ± 10.0
250 ± 12.5
DDU222C-10
DDU222C-20
DDU222C-50
DDU222C-60
DDU222C-75
DDU222C-100
DDU222C-125
DDU222C-150
DDU222C-175
DDU222C-200
DDU222C-250
5.0 ± 2.0
10.0 ± 3.0
12.0 ± 3.0
15.0 ± 3.0
20.0 ± 3.0
25.0 ± 3.0
30.0 ± 3.0
35.0 ± 4.0
40.0 ± 4.0
50.0 ± 5.0
·
·
8.0ns
25%
25%
25%
25%
* Total delay is referenced to first tap output
Input to first tap = 8.0ns ± 2ns
VCC IN
T1
T2
T3
T4
T5 GND
NOTE: Any dash number between 10 and 250 not
shown is also available.
Functional diagram for dash numbers < 40
20%
20%
20%
20%
20%
VCC IN
T1
T2
T3
T4
T5 GND
Functional diagram for dash numbers >= 40
Ó1997 Data Delay Devices
Doc #97014
1/28/97
DATA DELAY DEVICES, INC.
3 Mt. Prospect Ave. Clifton, NJ 07013
1