DDR12 Series
D u a l o u t p u t
DC-DC CONVERTERS Tracking Dual Output
1
NEW Product
• High current dual-output power module for DDR memory
• Single compact module provides 25 A @ 2.5 V for V
ddq
supply and 8 A @ 1.25 V for V termination
tt
• Tracking dual output voltages (1.25 V @ 8 A, 2.5 V @ 25 A)
• Output voltage remote sense (only on V
)
ddq
• Sink capability for logic terminations
• Power good output signal
• Overvoltage protection
• Overcurrent protection
• Remote ON/OFF
• Available RoHS compliant
The dual output DDR12-25D08-AJ is specially designed to meet the power needs of
double data rate memory DIMMS and associated memory control logic. The Vtt
output tracks the Vddq output, while the Vtt output can sink current as required by
logic terminations. This converter offers typical efficiencies greater than 84% when
operated at 50% load or greater. This model features a wide input range as well as
trimmable output voltages. Remote sense on Vddq and remote ON/OFF facilities are
included as standard, and the converter is protected against over-current and over-
voltage conditions.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
SPECIFICATIONS
OUTPUT SPECIFICATIONS - V
INPUT SPECIFICATIONS - Contd.
ddq
Voltage adjustability
2.32-2.75 Vdc
2.5%
Input reflected ripple
(See Note 4)
100 mA (pk-pk)
Output setpoint accuracy Using 1% trim resistors
Remote ON/OFF
Logic compatibility
Open collector ref to -input
>2.0 Vdc
Line regulation
Low line to high line
0.1%
ON
OFF
<0.8 Vdc
Load regulation
Minimum load to full load +0%/-1.0%
Start-up time
(See Note 5)
Power up
<20 ms
<20 ms
Cross regulation
Temperature Co-efficient
0.4%
Remote ON/OFF
0.2 mV/ºC
EMC CHARACTERISTICS
Ripple and noise
(See Note 1)
5 Hz to 20 MHz
4 A/100 µs
50 mV pk-pk
Electrostatic discharge
Conducted immunity
EN61000-4-2, IEC801-2
EN61000-4-2
Transient response
(See Note 2)
3.0% deviation
GENERAL SPECIFICATIONS
Overshoot
Nominal output at turn-on
2.0% max.
Efficiency
V
V
= 2.5 V
tt = 1.25 V
84% @ full load
ddq
Undershoot
150 mV max.
Switching frequency
(Fixed)
V
V
300 kHz typ.
300 kHz typ.
ddq
tt
OUTPUT SPECIFICATIONS - V
tt
Tracking Accuracy
Measured at Converter Pins
12 mV
30 mV pk-pk
Approvals and
standards
(See Note 7)
IEC60950/EN60950
UL/cUL 1950/60950
(=V /2 - V )
ddq tt
Ripple and noise
(See Note 1)
5 Hz to 20 MHz
Material flammability
Weight
UL94V-0
34 g (1.3 oz)
TBD hours
Transient response
(See Note 2)
8 A/1 µs
3.0% deviation
MTBF
Telcordia SR-332
INPUT SPECIFICATIONS
Input voltage range
Input current
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient,
Nominal 12 V
10.8-13.2 Vdc
0 °C to +80 °C
temperature
Non-operating
Minimum load
Remote OFF
400 mA
20 mA
-40 °C to +125 °C
Input current (max.)
(See Note 3)
9 A max. @ Io max.
and Vin = 10.8 Vdc
File Name: ddr12.pdf Rev: 04 Sept 2006