PXI/DAQ/DAQe-2500 Series
4/8-CH 12-Bit 1 MS/s Analog Output Multi-Function DAQ Cards
Introduction
ADLINK’s PXI/DAQ/DAQe-2500 series are high-speed and high-performance analog output
multi-function DAQ cards able to update up to 8-CH, 12-bit analog outputs simultane-
ously while sustaining a 1 MS/s rate. The reference sources and the output polarities
are programmable on a per channel basis. Combined with a multiplying DAC architecture,
the ADLINK PXI/DAQ/DAQe-2500 series of DAQ cards can generate complex modulated
analog signals.
DAQ-2502
The hardware-based arbitrary waveform generation reduces CPU loading even when all
analog outputs are updating at full speed, and the lengths of waveforms are only limited by
the system memory.
DAQe-2502
The PXI/DAQ/DAQe-2500 series integrates up to 8-CH, 400 kS/s, 14-bit single-ended analog
inputs with programmable polarity, 24-CH programmable digital I/O lines, and a 2-CH 16-bit
general-purpose timer/counter.
PXI-2502
The PXI/DAQ/DAQe-2500 series is able to perform analog input and output functions at
full speed simultaneously and multiple cards can be synchronized through the SSI (System
Synchronization Interface) bus or PXI trigger bus. The auto-calibration functions adjust the
gain and offset to within specified accuracies such that you do not have to adjust trimpots to
calibrate the boards.
Features
Pin Assignment
■
■
■
■
■
■
■
Supports a 32-bit 3.3 V or 5 V PCI bus (DAQ-2500 series)
PXI specification Rev 2.2 compliant (PXI-2500 series)
x1 lane PCI Express® Interface (DAQe-2500 series)
Hardware-based arbitrary waveform generation
Onboard 8 k-sample D/A FIFO (PXI/DAQ/DAQe-2501)
Onboard 16 k-sample D/A FIFO (PXI/DAQ/DAQe-2502)
Programmable bipolar or unipolar analog output ranges on
per channel basis
Connector CN1 Pin Assignment
AO_0
AO_1
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
EXTWFTRG_A
EXTWFTRG_B
VCC
1
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
2
AO_2
3
AO_3
4
AOEXTREF_A/AI_0
AI_1
5
SSI bus cable for multiple card synchronization
for DAQ/DAQe-2000 series
6
EXTTRIG/AI_2
AOEXTREF_B/AI_3
AO_4/AI_4
AO_5/AI_5
AO_6/AI_6
AO_7/AI_7
AO_TRIG_OUT_A
AO_TRIG_OUT_B
GPTC1_SRC
GPTC0_SRC
GPTC0_GATE
GPTC0_OUT
GPTC0_UPDOWN
RESERVED
AFI1
■
■
■
Programmable internal or external reference sources on per
channel basis
7
8
9
8-CH 400 kS/s 14-bit single-ended analog inputs
(PXI/DAQ/DAQe-2501)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
4-CH 400 kS/s 14-bit single-ended analog inputs
(PXI/DAQ/DAQe-2502)
■
■
■
■
■
■
■
■
Onboard 2 k-sample A/D FIFO
Bipolar or unipolar analog input ranges
Scatter-gather DMA for both analog inputs and outputs
24-CH TTL digital input/output
DGND
GPTC1_GATE
GPTC1_OUT
GPTC1_UPDOWN
DGND
AFI0
Terminal board DIN-68S-01 &
68-Pin SCSI-VHDCI cable ACL-10568-1
2-CH 16-bit general-purpose timer/counter
Analog & digital triggering
Fully auto-calibration
PB7
PB6
Terminal Boards & Cables
■ꢀDIN-68S-01
PB5
PB4
Multiple cards synchronization through SSI
(System Synchronization Interface) bus or PXI trigger bus
PB3
PB2
PB1
PB0
ꢀ
Terminal Board with One 68-pin SCSI-II
Connector and DIN-Rail Mounting (Cables are not
included.)
PC7
PC6
■ꢀOperating Systems
PC5
PC4
ꢀ
ꢀ
•ꢀWindows 7/Vista/XP/2000/2003 Server
•ꢀLinux
DNGD
DGND
PC2
PC3
■ꢀACL-10568-1
PC1
PC0
■ꢀRecommended Software
ꢀ
68-pin SCSI-VHDCI cable (mating with
AMP-787082-7), 1 M
PA7
PA6
PA5
PA4
ꢀ
ꢀ
ꢀ
•ꢀAD-Logger
PA3
PA2
* For more information on mating cables, please refer to P2-61/62.
•ꢀVB.NET/VC.NET/VB/VC++/BCB/Delphi
•ꢀDAQBench
PA1
PA0
* Pin 9-12 are AI<4..7> for 2501; AO<4..7> for 2502
* The external references inputs and the external
analog trigger share the analog input pins 5, 7, and 8
SSI Bus Cables
(for multiple cards synchronization)
■ꢀACL-SSI-2/3/4
SSI Bus cable for two, three, and four devices
■ꢀDriver Support
ꢀ
ꢀ
ꢀ
ꢀ
•ꢀDAQPilot for LabVIEW™
•ꢀDAQ-MTLB for MATLAB®
•ꢀD2K-DASK for Windows
•ꢀD2K-DASK/X for Linux
ꢀ
2-21
www.adlinktech.com