PXI/DAQ/DAQe-2200 Series
64-CH 12/16-Bit Up to 3 MS/s Multi-Function DAQ Cards
Ordering Information / Quick Selection Guide
Model Name
Analog Input
Analog Output
DIO
Timer/Counter
No. of
channels
No. of
channels
Sampling
rate
Resolution
Input range
Resolution Update rate
No. of channels No. of channels
PXI/DAQ/DAQe-2204
32 DI/64 SE
12 Bit
3 MS/s
(Single
±0.05 V to ±10 V
2
12 Bit
1 MS/s
24-CH 8255 PIO
2-CH, 16-Bit
channel)
1 MS/s
(Multi-
channel)
PXI/DAQ/DAQe-2205
PXI/DAQ/DAQe-2206
32 DI/64 SE
32 DI/64 SE
16 Bit
16 Bit
500 kS/s
250 kS/s
±1.25 V to ±10 V
±1.25 V to ±10 V
2
2
12 Bit
12 Bit
1 MS/s
1 MS/s
24-CH 8255 PIO
24-CH 8255 PIO
2-CH, 16-Bit
2-CH, 16-Bit
PXI-2204
DAQ-2204
DAQe-2204
Specifications
Model Name
Analog Input
PXI/DAQ/DAQe-2204
PXI/DAQ/DAQe-2205
PXI/DAQ/DAQe-2206
Resolution
12 Bit, no missing codes
16 Bit, no missing codes
Number of channels
Channel gain queue size
Maximum sampling rate
64 single-ended or 32 differential (software selectable per channel)
512
3 MS/s (Single channel)
1 MS/s (Multi-channel)
500 kS/s
250 kS/s
Programmable gain
Bipolar input ranges
Unipolar input ranges
Offset error
Gain error
Input coupling
Overvoltage protection
Input impedance
CMRR (gain = 1)
Settling time
-3 dB small signal bandwidth
(@Bipolar +/-10V Gain=1)
Trigger sources
Trigger modes
1, 2, 4, 5, 8, 10, 20, 40, 50, 200
1, 2, 4, 8
Max. : ±10 V, Min. : ±0.05 V±10 V, ±5 V, ±2.5 V, ±1.25 V±10 V, ±5 V, ±2.5 V, ±1.25 V
Max. : 0-10 V, Min. : 0-0.1 V0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
±2 mV
±1 mV
±0.08% of FSR
DC
±2 mV
±0.06% of FSR
±0.06% of FSR
Power on: Continuous ±30 V, Power off: Continuous ±15 V
1 GΩ/100 pF
90 dB
83 dB
1 μs to 0.1% error
2 μs to 0.1% error
4 μs to 0.01% error
2 MHz
850kHz
600 kHz
Software, external digital/analog trigger, SSI bus
Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
FIFO buffer size
Data transfers
1 k samples
Polling, scatter-gather DMA
Analog Output
Number of channels
Resolution
Output ranges
Maximum update rate
Slew rate
Settling time
Offset error
Gain error
Driving capacitꢂ
Stabilitꢂ
2 voltage outputs
Features
12 Bit
■
Supports a 32-Bit 3.3 V or 5 V PCI bus (DAQ-2200 series)
x1 lane PCI Express® Interface (DAQe-2200 series)
PXI specification Rev 2.2 compliant (PXI-2200 series)
64-CH single-ended or 32-CH differential analog inputs
Onboard 1 k-sample A/D FIFO
0-10 V, 10 V, 0-AOEXTREF, AOEXTREF
■
■
■
■
■
■
1 μs
20 V/μs
3 μs to 0ꢀ. ꢁSB accuracꢂ
±2 mV
±0.04% of max. output
1 mV
±1 mV
±0.02% of max. output
±0.02% of max. output
. mA
Bipolar or unipolar analog input ranges
Any passive load, up to 1500 pF
Software, external digital/analog trigger, SSI bus
Post-trigger, delay-trigger, and repeated trigger
1 k samples
Programmable gains:
Trigger sources
Trigger modes
FIFO buffer size
Data transfers
ꢀ
•ꢀx1, x2, x4, x5, x8, x10, x20, x40, x50, x200 (DAQ/DAQe-2204)
ꢀ
■
•ꢀx1, x2, x4, x8 (DAQ/DAQe-2205 & DAQ/DAQe-2206)
512-configuration channel gain queue
Scatter-gather DMA for both analog inputs and outputs
2-CH 12-Bit multiplying analog outputs with waveform
generation
Programmed I/O, scatter-gather DMA
Digital I/O
Number of channels
Compatibilitꢂ
■
■
24-CH 8255 programmable input/output
5 V/TTL
Data transfers
Programmed I/O
General-Purpose Timer/Counter
Number of channels
Resolution
Base clock available
General Specifications
Auto Calibration
■
■
■
■
■
■
Onboard 1 k-sample D/A FIFO
2
16-Bit
24-CH TTL digital input/output
40 MHz, external clock up to 10 MHz
2-CH 16-Bit general-purpose timer/counter
Analog and digital triggering
Yes (+5 V, ±2 ppm/˚C)
Dimensions
160 mm x 100 mm (6.24" x 3.9") (not including connectors) (PXI-2200 series)
175 mm x 107 mm (6.82" x 4.17") (not including connectors) (DAQ-2200 series)
168 mm x 107 mm (6.55" x 4.17") (not including connectors) (DAQe-2200 series)
68-pin VHDCI female x 2
Fully auto calibration
Multiple cards synchronization through SSI (System
Synchronization Interface) bus or PXI trigger bus
Connector
Operating temperature
Storage temperature
Humiditꢂ
0˚C to 55˚C (32˚F to 131˚F)
■ꢀSupported Operating System
•ꢀWindows 7/8 x64/x86, Linux
■ꢀDriver and SDK
-20˚C to 70˚C (-4˚F to 158˚F)
ꢀ
5 to 95%, non-condensing
Power requirements
+. V 1ꢀ3 A tꢂpical
(PXI/DAQ-2204)
+. V 1ꢀ2 A tꢂpical
(PXI/DAQ-220.)
+. V 1ꢀ2 A tꢂpical
(PXI/DAQ-2206)
+3ꢀ3 V 0ꢀ9 A, +12 V 0ꢀ.64 A
tꢂpical (DAQe-2204)
+3ꢀ3 V 0ꢀ81 A, +12 V 0ꢀ.68 A
tꢂpical (DAQe-220.)
+3ꢀ3 V 0ꢀ7.6 A, +12 V 0ꢀ.84 A
tꢂpical (DAQe-2206)
ꢀ
•ꢀLabVIEW, MATLAB, C/C++, Visual Basic,
Visual Studio.NET
Terminal Boards & Cables
■ꢀDIN-68S-01
■ꢀSoftware Utility
■ꢀACL-SSI-2/3/4
ꢀ
•ꢀAD-Logger
* For more information on mating terminal board and cables, please
refer to P3-48/49.
■ꢀACL-10568-1
3-2
www.adlinktech.com