5秒后页面跳转
DS1065-60 PDF预览

DS1065-60

更新时间: 2024-02-29 13:53:40
品牌 Logo 应用领域
达拉斯 - DALLAS 微控制器和处理器外围集成电路uCs集成电路uPs集成电路
页数 文件大小 规格书
10页 185K
描述
EconOscillator/Divider

DS1065-60 技术参数

是否Rohs认证: 不符合生命周期:Transferred
包装说明:TO-92, 3 PINReach Compliance Code:unknown
风险等级:5.69JESD-30 代码:O-PBCY-T3
JESD-609代码:e0端子数量:3
最高工作温度:70 °C最低工作温度:
封装主体材料:PLASTIC/EPOXY封装形状:ROUND
封装形式:CYLINDRICAL认证状态:Not Qualified
最大供电电压:5.25 V最小供电电压:4.75 V
标称供电电压:5 V表面贴装:NO
技术:CMOS温度等级:COMMERCIAL
端子面层:Tin/Lead (Sn/Pb)端子形式:THROUGH-HOLE
端子位置:BOTTOMuPs/uCs/外围集成电路类型:MICROPROCESSOR CIRCUIT
Base Number Matches:1

DS1065-60 数据手册

 浏览型号DS1065-60的Datasheet PDF文件第2页浏览型号DS1065-60的Datasheet PDF文件第3页浏览型号DS1065-60的Datasheet PDF文件第4页浏览型号DS1065-60的Datasheet PDF文件第5页浏览型号DS1065-60的Datasheet PDF文件第6页浏览型号DS1065-60的Datasheet PDF文件第7页 
PRELIMINARY  
DS1065  
EconOscillator/Divider  
www.dalsemi.com  
FEATURES  
PIN ASSIGNMENT  
C 30 kHz to 100 MHz output frequencies  
C User-programmable on-chip dividers (from 1-  
513)  
Dallas  
DS1065  
C User-programmable on-chip prescaler (1, 2,  
4)  
C No external components  
C M0.5% initial tolerance  
C M3% variation over temperature and voltage  
C Single 5V supply  
1 2  
1 2  
3
3
FREQUENCY OPTIONS  
BOTTOM  
VIEW  
Part No.  
Max O/P freq.  
100.000 MHz  
80.000 MHz  
66.667 MHz  
60.000 MHz  
DS1065-100  
DS1065-80  
DS1065-66  
DS1065-60  
PIN DESCRIPTION  
TO-92  
1 I/O  
- Input/Output  
- Power Supply  
- Ground  
2 VCC  
3 GND  
DESCRIPTION  
The DS1065 is a fixed frequency oscillator requiring no external components for operation. Numerous  
operating frequencies are possible in the range of approximately 30 kHz to 100 MHz through the use of  
an on-chip programmable prescaler and divider.  
The DS1065 features a master oscillator followed by a prescaler and then a programmable divider. The  
prescaler and programmable divider are user-programmable with the desired values being stored in  
nonvolatile memory. This allows the user to buy an off the shelf component and program it on site prior  
to board production. Design changes can be accommodated easily by simply programming different  
values into the device (or reprogramming previously programmed devices). The DS1065 is shipped from  
the factory configured for half the maximum operating frequency. Contact the factory for specially  
programmed devices.  
The DS1065 features a dual-purpose Input/Output pin. If the device is powered up in Program mode this  
pin can be used to input serial data to the on-chip registers. After a write command this data is stored in  
nonvolatile memory. When the chip is subsequently powered up in operating mode these values are  
automatically restored to the on-chip registers and the Input/Output pin becomes the oscillator output.  
The DS1065 is available in TO-92 (3 LEAD) package, allowing the generation of a clock signal easily,  
economically and using minimal board area.  
1 of 10  
011200  

与DS1065-60相关器件

型号 品牌 描述 获取价格 数据表
DS1065-66 DALLAS EconOscillator/Divider

获取价格

DS1065-80 DALLAS EconOscillator/Divider

获取价格

DS1065T-100 ETC IC-OSC/DIVIDER

获取价格

DS1065T-60 ETC IC-OSC/DIVIDER

获取价格

DS1065T-66 ETC IC-OSC/DIVIDER

获取价格

DS1065T-80 ETC IC-OSC/DIVIDER

获取价格