B
u
r
r
Ć
B
r
o
w
n
P
r
o
d
u
c
t
s
DAC8881
f
r
o
m
T
e
x
a
s
I
n
s
t
r
u
m
e
n
t
s
SBAS422A–JULY 2007–REVISED SEPTEMBER 2007
16-Bit, Single-Channel, Low-Noise, Voltage-Output
DIGITAL-TO-ANALOG CONVERTER
1
FEATURES
DESCRIPTION
2345
•
Relative Accuracy: ±0.5 LSB
16-Bit Monotonic Over Temperature Range
Low-Noise: 24nV/√Hz
The DAC8881 is
a
16-bit, single-channel,
voltage-output digital-to-analog converter (DAC) that
offers low-power operation and a flexible SPI serial
interface. It also features 16-bit monotonicity,
excellent linearity, and fast settling time. The on-chip
precision output amplifier allows rail-to-rail output
swing to be achieved over the full supply range of
2.7V to 5.5V.
•
•
•
•
Fast Settling: 5μs
On-Chip Output Buffer Amplifier with
Rail-to-Rail Operation
•
•
•
Wide, Single Power Supply: +2.7V to +5.5V
DAC Loading Control
The device supports a standard SPI serial interface
capable of operating with input data clock frequencies
up to 50MHz. The DAC8881 requires an external
reference voltage to set the output range of the DAC
channel. A programmable power-on reset circuit is
also incorporated into the device to ensure that the
DAC output powers up at zero-scale or midscale, and
remains there until a valid write command.
Selectable Power-On Reset to Zero-Scale or
Midscale
•
•
Power-Down Mode
Unipolar Straight Binary or
2's Complement Input Mode
•
•
Fast SPI™ Interface with Schmitt-Triggered
Inputs:
Up To 50MHz, 1.8V/3V/5V Logic
Additionally, the device has the capability to function
in either unipolar straight binary or 2's complement
mode. The DAC8881 provides a power-down feature,
accessed over the PDN pin, that reduces the current
consumption to 25μA at 5V. Power consumption is
6mW at 5V, reducing to 125μW in power-down mode.
Small Package: QFN-24, 4x4mm
APPLICATIONS
•
•
•
•
•
Industrial Process Control
Data Acquisition Systems
Automatic Test Equipment
Communications
The DAC8881 is available in a 4x4mm QFN-24
package with a specified operating temperature range
of –40°C to +105°C.
Optical Networking
DVDD
DGND
IOVDD
AGND
AVDD
VREFH-S VREFH-F
DAC8881
RST
RSTSEL
USB/BTC
GAIN
Power-On
Reset
Control
Logic
Resistor
Network
SDI
CS
PDN
VOUT
RFB
SCLK
Input
Register
DAC
Latch
DAC
(1)
RFB
SDOSEL
SDO
Serial Out
Control
NOTE: (1) RFB = 5kW for gain = 1,
RFB = 10kW for gain = 2.
LDAC
VREFL-S
VREFL-F
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
3
4
5
DSP is a trademark of Texas Instruments.
SPI, QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007, Texas Instruments Incorporated