DAC81404, DAC61404
SLASEH2A – NOVEMBER 2020 – REVISED MAY 2021
DACx1404 Quad, 16-Bit and 12-Bit, High-Voltage-Output DACs
With Internal Reference
1 Features
3 Description
•
Performance:
The 16-bit DAC81404 and 12-bit DAC61404
(DACx1404) are pin-compatible, quad-channel,
buffered, high-voltage-output, digital-to-analog
converters (DACs). These devices include a low-drift,
2.5-V internal reference that eliminates the need for
an external precision reference in most applications.
The devices are specified monotonic and provide
high linearity of ±1 LSB INL. Additionally, the devices
implement per channel sense pins to eliminate IR
drops and sense up to ±12 V of ground bounce.
– Specified monotonic at 16-bit resolution
– INL: ±1 LSB maximum at 16-bit resolution
– TUE: ±0.05% FSR, maximum
Integrated output buffer
– Full-scale output voltage: ±5 V, ±10 V, ±20 V,
5 V, 10 V, 20 V, 40 V
– High drive capability: ±15 mA
– Per channel sense pins
Integrated 2.5-V precision reference
– Initial accuracy: ±2.5 mV, maximum
– Low drift: 10 ppm/°C, maximum
Reliability features:
– CRC error check
– Short circuit limit
– Fault pin
50-MHz, SPI-compatible serial interface
– 4-wire mode, 1.7-V to 5.5-V operation
– Readback and daisy-chain operations
Temperature range: –40°C to +125°C
Package: 5-mm × 5-mm, 32-pin QFN
•
•
•
A user-selectable output configuration enables full-
scale bipolar output voltages of ±20 V, ±10 V, and
±5 V; and full-scale unipolar output voltages of 40 V,
20 V, 10 V and 5 V. The full-scale output range for
each DAC channel is independently programmable.
The integrated DAC output buffers can sink or source
up to 15 mA, thus limiting the need for additional
operational amplifiers.
•
The DACx1404 incorporate a power-on-reset circuit
that connects the DAC outputs to ground at power
up. The outputs remain in this mode until the device
is properly configured for operation. These devices
include additional reliability features, such as a CRC
error check, short-circuit protection, and a thermal
alarm.
•
•
2 Applications
•
•
•
•
•
•
Semiconductor test
Lab and field Instrumentation
Analog output module
Data acquisition (DAQ)
LCD test
Communication to the devices is performed through
a 4-wire serial interface that supports operation from
1.7 V to 5.5 V.
Servo drive control module
IOVDD DVDD
FAULT
REFIO
AVDD
Device Information
PART NUMBER
DAC81404
PACKAGE(1)
BODY SIZE (NOM)
Internal Reference
Power On
Reset
REF
BUF
VQFN (32)
5.00 mm × 5.00 mm
SCLK
SDIN
SYNC
SDO
DAC61404
REF
DAC
Ladder
Buffer
Register
Active
Register
CCOMP[A:D]
OUT[A:D]
(1) For all available packages, see the package option
addendum at the end of the data sheet.
+
LDAC
–
RST
CLR
40 k
AVDD
SENSEP[A:D]
SENSEN[A:D]
40 k
Channel
A
40 k
–
+
40 k
Resistor Gain
Network
CCOMPX
REF
REF
DAC
Ladder
+
-
R
Current Limit
OUTX
40 k
40 k
40 k
40 k
GND
AGND
REFGND
AVSS
-
+
AVSS
GND
SENSEPX
Resistor Gain
Network
Functional Block Diagram
SENSENX
REF
REFGND
High Current Drive (1 A) Application
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.