DA9061
Entry level PMIC for applications requiring up to 6 A
General description
DA9061 is a power management integrated circuit (PMIC) optimised for supplying systems with
single- and dual-core processors, I/O, DDR memory, and peripherals. It targets mobile device,
medical equipment, entry level IVI system, and FPGA based applications.
DA9061 features three buck converters providing a total current of 6 A. High efficiency is achieved
over a wide load range by using automatic Pulse Frequency Modulation (PFM) mode. All power
switches are integrated, therefore, external Schottky diodes are not required. Furthermore, low-
profile inductors can be used with DA9061. The four LDO regulators with programmable output
voltage provide up to 300 mA.
Dynamic voltage control (DVC) allows dynamic control of DA9061 supply voltages according to the
operating point of the system. It is controlled by writing directly to the registers using the I2C
compatible 2-wire interface or the GPIOs.
DA9061 features a programmable power sequencer that handles start-up and shutdown sequences.
Power mode transitions can be triggered with software control, GPIOs, or with the on-key. Several
types of on-key presses can be detected to trigger different power mode transitions.
An integrated watchdog timer monitors the system.
Five GPIOs are able to perform system functions, including: keypad supervision, application buck,
and timing-controlled external regulators/power switches or other ICs.
DA9061 is also available as an automotive AEC-Q100 Grade 3 version.
Key features
■
■
Input voltage 2.8 to 5.5 V
■
■
Programmable power mode sequencer
Three buck converters with dynamic voltage
control:
System supply and junction temperature
monitoring
□
□
□
□
Buck1: 0.3 to 1.57 V, 2.5 A
Buck2: 0.8 to 3.34 V, 2 A
Buck3: 0.53 to 1.8 V, 1.5 A
■
■
■
■
■
Watchdog timer
Five GPIOs
-40 to +85 °C temperature range
40-pin QFN, 6×6 mm package, 0.5 mm pitch
3 MHz switching frequency (enables low
profile inductors)
Automotive AEC-Q100 Grade 3 variant
available
■
Four LDO regulators:
□
□
LDO1: 0.9 to 3.6 V, 100 mA
LDO2, LDO3, LDO4: 0.9 to 3.6 V, 300 mA
Applications
■
Supply for single and dual core application
processors such as ARM Cortex or i.MX6
series
■
■
■
Automotive infotainment
Portable industrial and medical devices
E-book readers
■
Power supply for entry-level FPGAs
Datasheet
Revision 3.2
01-Mar-2016
CFR0011-120-00 Rev 5
1 of 82
© 2016 Dialog Semiconductor