DA7210
Ultra-low power stereo codec
Company confidential
General description
The DA7210 is a high fidelity audio codec with integrated true-ground capless headphone driver
suitable for a variety of low power, digital portable audio products.
Featuring a high efficiency headphone amplifier and supporting economic single supply voltages
down to 1.8 V, the ultra-low 2.5 mW power consumption extends music playback time for battery
operated equipment.
Eight analogue input pins allow multiple audio sources to be internally mixed, eliminating the need for
external switches. Both single-ended and fully-differential line and microphone inputs are supported
with built-in variable gain amplifiers to optimise dynamic range prior to digitisation.
DA7210 provides simultaneous connection to stereo headphone, stereo line outputs, and a mono
differential output. Stereo line outputs can be differential or single-ended. Both stereo outputs have
volume control from -54 dB to +15 dB.
Filtering and gain control is performed digitally including 5-band EQ and a digital input AGC with
programmable attack and decay parameters. A configurable signal processing engine allows various
enhancements and effects on the digital audio signal like acoustic filtering, wind noise suppression
and 3D sound.
The multi-slot I2S/PCM interface supports all common sample rates between 8 and 96 kHz in master
or slave mode operation.
Key features
■
■
■
Stereo multi-bit Delta Sigma DAC with SNR
100 dB ('A' weighted @ 48 kHz)
■
■
Audio serial data bus supports I2S,
left/right justified, DSP and TDM modes
Stereo multi-bit Delta Sigma ADC with SNR
96 dB ('A' weighted @ 48 kHz)
Stereo or mono differential microphone
interface
Ultra low-power stereo headphone driver with ■ Programmable ultra-low noise bias supply for
electret microphones
□
Stereo DAC to HP playback power:
2.5 mW
■
Volume controlled stereo auxiliary inputs and
outputs supporting FM Radio and fixed gain
speaker amplifiers
□
□
□
2x58 mW output power (16 Ω)
‘Capless’ output via GND centred signals
■
■
■
Multi-mode audio routing and mixers
Pop & click suppression circuitry
Four level charge pump with continuous
tracking of audio signal (Class G)
ASSP DSP filter engine for digital audio
enhancements (acoustic filtering, wind noise
suppression, 5-band equaliser, 3D sound,
automatic gain control)
□
Short circuit protection
■
■
■
Support of 8, 11.025, 12, 16, 22.05, 24, 32,
44.1, 48 and 96 kHz sample rates
On-chip PLL with signal shaper and audio
Sample Rate Matching
■
Supports supply from single voltage
(1.8/2.5 V)
Wide range of external clocks including
industry standard 256xFs, system clock 12,
13, 24, 26 or 27 MHz and low power 32 kHz
mode
■
■
Extensive modular power control
Package: 49 bump WL-CSP – 0.4 mm pitch
Applications
■
■
Personal media players
■
■
Music handsets
Portable consumer devices
Personal navigation devices
Datasheet
Revision 3a
15-Oct-2015
CFR0011-120-00 Rev 5
1 of 113
© 2015 Dialog Semiconductor