Document 512
SMT Gate Drive Transformers
• Designed for high switching speed, transformer coupled
MOSFET and IGBT gate drive circuits.
• Operating frequency: 50 kHz – 2 MHz
• Primary to secondary isolation:1500Vdc.For DA2317-AL and
DA2320-AL, isolation between secondaries is 500 Vdc.
Core material Ferrite
Terminations RoHS compliant tin-silver over tin over nickel over phos
bronze. Other terminations available at additional cost.
Weight 535 – 580 mg
Ambient temperature –40°C to +125°C
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 250/7″ reel; 1000/13″ reel Plastic tape: 16 mm wide,
0.36 mm thick, 20 mm pocket spacing, 5.54 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf
Turns
ratio
pri : sec
Primary
Leakage
Primary
Secondary
DCR max
(Ohms)
Volt-time
product
(V-µsec)
SRF Capacitance
min4 pri to sec
(MHz) max (pF)
Part
inductance2 inductance3 DCR max
number1
min (µH)
max (µH)
(Ohms)
DA2319-AL_
DA2318-AL_
DA2320-AL_
DA2317-AL_
1 :1
296.0
680.0
264.0
330.0
1.5
4.0
0.30
0.60
0.795
1.65
1.50
1.40
0.655
0.860
25.8
40.8
24.5
24.5
1.75
1.25
2.50
2.00
14.0
14.0
95.0
18.0
1.5 :1
1:1 :1
2:1 :1
1.50 (2-5; 3-4)
0.650 (2-5); 0.790 (3-4)
Dot over pin 1
1. When ordering, please specify termination and packaging codes:
DA2320-ALC
0.213
max
Termination:L = RoHS compliant tin-silver over tin over nickel over
phos bronze
5,40
Special order, added cost:
S = non-RoHS tin-lead (63/37)
0.004/0,10
0.022
0,55
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
0.260
6,60
max
0.323
max
tape (250 parts per full reel).
8,20
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
0.024
0,60
5,00
0.035
0,90
0.197
0.063
1,60
0.228
5,80
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (1000 parts per
full reel).
1
2
3
6
5
4
3
2
1
4
0.073
5
1,85
6
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc
3. Leakage inductance measured at 100 kHz, 0.1 Vrms with secondary
pins shorted.
4. SRF measured with coils connected in series using an Agilent/HP
4192 or equivalent.
5. Operating temperature range −40°C to +125°C.
6. Electrical specifications at 25°C.
0.073
1,85
Recommended
Land Pattern
inches
mm
Dimensions are in
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
DA2318-AL, DA2319-AL
DA2317-AL, DA2320-AL
4
1
2
Pri
Sec
1
Pri
6
3
5
3
Sec
6
4
Document 512 Revised 07/18/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.