®
Display Receiver with Limit Outputs
Type D 6369 6475
Du line
Fieldbus Installationbus
• 4-digit 7-segment LED-display with sign
• Freely scaleable
• 2 relay limit outputs (HI, LO)
• 2 NPN transistor limit outputs (HIHI, LOLO)
• LED-indication for all limit outputs
• Automatic or manual reset of limit outputs
• Protocol selectable (3 1/2-digit BCD, 4-digit BCD,
8 bit binary)
• Multiplex or normal mode
• Internal or external selection of multiplex address
• AC power supply
Product Description
Ordering Key
D 6369 6475 024
Freely scaleable Dupline®
4
Type: Dupline®
Type no.
values or time. 4 limit outputs
with LED-indication. Protocol
selectable (3 1/2 digit BCD,
4-digit BCD, 8 bit binary)
digit LED-display with sign,
for panel mounting. Readout
of analog signals, counter
Supply
Type Selection
Supply
Ordering no.
8/16 channels
4-digit LED
24 VAC
115/230 VAC
D 6369 6475 024
D 6369 6475 230
No code module required
Input/Output Specifications
Inputs
Display
Display format
Display range
Limit output reset
1 contact or NPN transistor
4 contacts or NPN transistors
5 VDC
50 µA
≤ 10 Ω
≤ 2 m
7-segment
-9999 to +9999 (4 digits)
LED
14.2 mm
Red
Yes
Configurable by keys
Yes
Yes
Multiplex address selection
Open loop voltage
Short circuit current
Contact resistance
Cable length
Display type
Height of digits
Display colour
Change of sign (automatic)
Decimal point
Scaling feature
Multiplex feature
Display test
Dielectric voltage
Inputs - Dupline®
≥ 500 VAC (rms)
≥ 4 kVAC (rms)
≥ 4 kVAC (rms)
Inputs - Relay outputs
Inputs - Transistor outputs
Yes
Transmission protocol
3 1/2, 4-digit BCD,
8 bit binary
4 (HIHI, HI, LO, LOLO)
HI, LO - limit outputs
Isolated in groups of
Contact ratings (AgCd0)
2 SPST relays
2 x 1
µ (micro gap)
Limit values
Resistive load
AC1
DC1
or
5 A/250 VAC (1100VA)
0.25 A/250 VDC (62 W)
5 A/25 VDC (125 W)
2.5 A/230 VAC
5 A/24 VDC
Settings
Channel address
Keys and display
Keys and display
Keys and display
Keys and display
Keys and display
Keys and display
Keys and display
2 DIP switches
Multiplex address (internal)
Scaling
Decimal point position
Limit values
Normal/multiplex mode
Enable/disable limit outputs
Transmission protocol
Internal/external selection of
multiplex address
Automatic/manual reset of
limit outputs
Inductive loads
Mechanical life
AC15
DC13
≥ 30 x 106 operations
Electrical life (max. load)AC1 ≥ 2.5 x 105 operations
Operating frequency
Dielectric voltage
≤ 7200 operations/h
Outputs - Dupline®
≥ 4kVAC (rms)
Outputs - transistor outputs ≥ 4kVAC (rms)
1 DIP switch
1 DIP switch
Specifications are subject to change without notice (12.10.05)
1
Dupline® is a registered trademark. A product of the CARLO GAVAZZI Group