CUSTOMER DRAWING
Product
Name
Product Dimensions
Cable Dimensions
L
max
øA
min
øB
min
øD
max
øE
øG
J0.5
(J0.02)
7
min
max
D-101-31
17.25
4.55
5.00
5.00
2.5
4.55
(0.680)
(0.180)
(0.200)
(0.200)
(0.100)
(0.180)
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROM1 per ANSI-J-STD-004.
3. MELTABLE RING: Thermally stabilized thermoplastic. Color: gray.
4. MELTABLE RING: Thermally stabilized thermoplastic. Color: blue.
APPLICATION
1. This part is designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the
dimensional criteria listed, having nickel plated copper shields.
2. Install using TE approved convection or infrared tools in accordance with TE assembly procedure RCPS-100-70.
3. Assemblies will meet requirements of TE specification RT-1404 and National Aerospace Standard NAS-1747.
4. Temperature range: -55C to +150C.
For best results, prepare the cable as shown:
TITLE:
SOLDERSLEEVE SHIELD
TERMINATOR
DOCUMENT NO.:
Unless otherwise specified dimensions are in
millimeters.[Inches dimensions are shown in brackets]
Raychem
Devices
D-101-31
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
Tyco Electronics Corporation reserves
the right to amend this drawing at any
time. Users should evaluate the
suitability of the product for their
application.
REV:
DATE:
ROUGHNESS
IN MICRON
C
June 9, 2011
0 N/A
PREPARED BY:
CAGE CODE:
ECO NUMBER:
SCALE:
SIZE:
SHEET:
YNGUYEN
06090
ECO-11-011935
NTS
A
1 of 1
© 2009-2011 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.