CYP15G0401DXB
CYV15G0401DXB
Quad HOTLink II™ Transceiver
• Dual differential PECL-compatible serial inputs per
channel
— Internal DC-restoration
Features
• Quad channel transceiver for 195 to 1500 MBaud serial
signaling rate
• Dual differential PECL-compatible serial outputs per
— Aggregate throughput of 12 GBits/second
• Second-generation HOTLink® technology
• Compliant to multiple standards
channel
— Source matched for 50Ω transmission lines
— No external bias resistors required
— Signaling-rate controlled edge-rates
• Compatible with
— ESCON, DVB-ASI, Fibre Channel and Gigabit
Ethernet (IEEE802.3z)
— CYV15G0401DXB also compliant to SMPTE 259M
and SMPTE 292M
—fiber-optic modules
—8B/10B encoded or 10-bit unencoded data
• Selectable parity check/generate
• Selectable multi-channel bonding options
— Four 8-bit channels
—Two 16-bit channels
— One 32-bit channel
— copper cables
— circuit board traces
• JTAG boundary scan
• Built-In Self-Test (BIST) for at-speed link testing
• Per-channel Link Quality Indicator
— Analog signal detect
— N x 32-bit channel support (inter-chip)
• Skew alignment support for multiple bytes of offset
• Selectable input/output clocking options
• MultiFrame™ Receive Framer
— Digital signal detect
• Low power 2.5W @ 3.3V typical
• Single 3.3V supply
• 256-ball thermally enhanced BGA
• 0.25µ BiCMOS technology
— Bit and Byte alignment
—Comma or full K28.5 detect
—Single- or multi-byte framer for byte alignment
— Low-latency option
Functional Description
The CYP(V)15G0401DXB[1] Quad HOTLink II™ Transceiver
is a point-to-point or point-to-multipoint communications
building block allowing the transfer of data over high-speed
serial links (optical fiber, balanced, and unbalanced copper
transmission lines) at signaling speeds ranging from
195-to-1500 MBaud per serial link.
• Synchronous LVTTL parallel interface
• Optional Elasticity Buffer in Receive Path
• Optional Phase Align Buffer in Transmit Path
• Internal phase-locked loops (PLLs) with no external
PLL components
10
10
10
Serial Links
10
10
10
10
10
10
10
10
Serial Links
10
10
10
10
10
Serial Links
Serial Links
Backplane or
Cabled
Connections
Figure 1. HOTLink II System Connections
Note:
1. CYV15G0401DXB refers to SMPTE 259M and SMPTE 292M compliant devices. CYP15G0401DXB refers to devices not compliant to SMPTE 259M and SMPTE
292M pathological test requirements. CYP(V)15G0401DXB refers to both devices.
Cypress Semiconductor Corporation
•
3901 North First Street
•
San Jose, CA 95134
•
408-943-2600
Document #: 38-02002 Rev. *K
Revised March 16, 2004