CYAT837X/847X
PSoC™ Automotive Multitouch Generation
7XL Multichip
Datasheet Summary
Note that this is a Summary Datasheet. To access the full version of this datasheet, register in
My Infineon Collaboration Platform (MyICP).
Features
• Automotive Electronics Council (AEC) AEC-Q100 qualified
• Multi-chip capacitive touchscreen controller
- 32-bit Arm® Cortex® CPU
- Register-configurable
- Noise-suppression technologies for display and EMI
• Effective 20-V drive for higher signal-to-noise ratio (SNR)[1]
• AutoArmor improves both electromagnetic emissions and immunity
- Water rejection and wet-finger tracking using DualSense
- Multitouch glove with automatic mode switching
• Ten fingers with thin glove (≤1-mm thick)
• Two fingers with thick glove (≤5-mm thick)
- Fingernail tracking
- Large object rejection
- Automatic baseline tracking to environmental changes
- Field upgrades via bootloader
- Manufacturing test kit (MTK)
- Android driver support
- Touchscreen sensor self-test
• System performance (configuration dependent)
- Screen sizes up to 35-inch diagonal
• 6-mm electrode pitch; 16:10 aspect ratio
- Up to 296 sense pins, 10320 intersections
- Reports up to ten fingers
- Small finger support down to 5 mm
- Refresh rate up to 120 Hz; other rates configurable
- TX frequency up to 150 kHz
- 5-V TX with high-order multi-phase TX capability for higher signal-to-noise (SNR) ratio
- Integrated DSP to process and filter data for faster scanning and lower noise
- 192 channels, each with its own ADC, to enable single-pass long-side scanning for faster processing of touch
data and better noise filtering
• Power (configuration-dependent)
- 1.71 to 1.95 V and 3.0 to 5.5 V logic and digital I/Os supply
- 3.0 to 5.5 V analog supply
- 260 mW for 3-chip solution
- 174 mW for 2-chip solution
Notes
1. Effective voltage when using 17 multi-phase TX and 5-V VCCTX supply.
Datasheet Summary
www.infineon.com
Please read the Important Notice and Warnings at the end of this document
page 1
002-35956 Rev. **
2022-07-26