5秒后页面跳转
捷配首页

Datasheet > 存储 > SRAM> CY7C1383D-100AXC
CY7C1383D-100AXC PDF预览

CY7C1383D-100AXC

更新时间： 2024-11-13 05:19:27
品牌 Logo 应用领域
赛普拉斯 - CYPRESS 静态存储器
页数 文件大小 规格书
29页 466K
描述
18-Mbit (512K x 36/1M x 18) Flow-Through SRAM

阅读下载

中文翻译

获取价格

CY7C1383D-100AXC 技术参数

是否Rohs认证： 符合生命周期：Obsolete
零件包装代码：QFP包装说明：14 X 20 MM, 1.40 MM HEIGHT, LEAD FREE, PLASTIC, MS-026, TQFP-100
针数：100Reach Compliance Code：unknown
ECCN代码：3A991.B.2.AHTS代码：8542.32.00.41
风险等级：5.72最长访问时间：8.5 ns
其他特性：FLOW-THROUGH ARCHITECTURE最大时钟频率 (fCLK)：100 MHz
I/O 类型：COMMONJESD-30 代码：R-PQFP-G100
JESD-609代码：e3长度：20 mm
内存密度：18874368 bit内存集成电路类型：CACHE SRAM
内存宽度：18湿度敏感等级：3
功能数量：1端子数量：100
字数：1048576 words字数代码：1000000
工作模式：SYNCHRONOUS最高工作温度：70 °C
最低工作温度：组织：1MX18
输出特性：3-STATE封装主体材料：PLASTIC/EPOXY
封装代码：LQFP封装等效代码：QFP100,.63X.87
封装形状：RECTANGULAR封装形式：FLATPACK, LOW PROFILE
并行/串行：PARALLEL峰值回流温度（摄氏度）：260
电源：2.5/3.3,3.3 V认证状态：Not Qualified
座面最大高度：1.6 mm最大待机电流：0.07 A
最小待机电流：3.14 V子类别：SRAMs
最大压摆率：0.175 mA最大供电电压 (Vsup)：3.6 V
最小供电电压 (Vsup)：3.135 V标称供电电压 (Vsup)：3.3 V
表面贴装：YES技术：CMOS
温度等级：COMMERCIAL端子面层：Matte Tin (Sn)
端子形式：GULL WING端子节距：0.65 mm
端子位置：QUAD处于峰值回流温度下的最长时间：20
宽度：14 mmBase Number Matches：1

CY7C1383D-100AXC 数据手册

 浏览型号CY7C1383D-100AXC的Datasheet PDF文件第2页浏览型号CY7C1383D-100AXC的Datasheet PDF文件第3页浏览型号CY7C1383D-100AXC的Datasheet PDF文件第4页浏览型号CY7C1383D-100AXC的Datasheet PDF文件第5页浏览型号CY7C1383D-100AXC的Datasheet PDF文件第6页浏览型号CY7C1383D-100AXC的Datasheet PDF文件第7页 
CY7C1381D  
CY7C1383D  
PRELIMINARY  
18-Mbit (512K x 36/1M x 18) Flow-Through SRAM  
Features  
Functional Description[1]  
• Supports 133-MHz bus operations  
• 512K × 36/1M × 18 common I/O  
• 3.3V –5% and +10% core power supply (VDD  
The CY7C1381D/CY7C1383D is a 3.3V, 512K x 36 and 1 Mbit  
18 Synchronous Flow-through SRAMs, respectively  
x
designed to interface with high-speed microprocessors with  
minimum glue logic. Maximum access delay from clock rise is  
6.5 ns (133-MHz version). A 2-bit on-chip counter captures the  
first address in a burst and increments the address automati-  
cally for the rest of the burst access. All synchronous inputs  
are gated by registers controlled by a positive-edge-triggered  
Clock Input (CLK). The synchronous inputs include all  
)
• 2.5V or 3.3V I/O supply (VDDQ  
• Fast clock-to-output time  
— 6.5 ns (133-MHz version)  
— 8.5 ns (100-MHz version)  
)
addresses, all data inputs, address-pipelining Chip Enable  
[2]  
• Provide high-performance 2-1-1-1 access rate  
(
), depth-expansion Chip Enables (CE and  
), Burst  
CE3  
CE1  
2
• User-selectable burst counter supporting Intel  
Control inputs (  
,
,
), Write Enables  
(
ADV  
BWx  
and  
,
ADSC ADSP  
Pentiuminterleaved or linear burst sequences  
), and Global Write (  
BWE  
). Asynchronous  
GW  
and  
inputs  
(
)
and the ZZ pin  
OE  
.
include the Output Enable  
• Separate processor and controller address strobes  
• Synchronous self-timed write  
• Asynchronous output enable  
The CY7C1381D/CY7C1383D allows either interleaved or  
linear burst sequences, selected by the MODE input pin. A  
HIGH selects an interleaved burst sequence, while a LOW  
selects a linear burst sequence. Burst accesses can be  
initiated with the Processor Address Strobe (ADSP) or the  
cache Controller Address Strobe (ADSC) inputs. Address  
advancement is controlled by the Address Advancement  
(ADV) input.  
• Offered in JEDEC-standard lead-free 100-pin TQFP  
,119-ball BGA and 165-ball fBGA packages  
• JTAG boundary scan for BGA and fBGA packages  
• “ZZ” Sleep Mode option  
Addresses and chip enables are registered at rising edge of  
clock when either Address Strobe Processor (  
) or  
ADSP  
Address Strobe Controller (  
) are active. Subsequent  
ADSC  
burst addresses can be internally generated as controlled by  
the Advance pin ( ).  
ADV  
The CY7C1381D/CY7C1383D operates from a +3.3V core  
power supply while all outputs may operate with either a +2.5  
or +3.3V supply. All inputs and outputs are JEDEC-standard  
JESD8-5-compatible.  
Selection Guide  
133 MHz  
6.5  
100 MHz  
8.5  
Unit  
ns  
Maximum Access Time  
Maximum Operating Current  
Maximum CMOS Standby Current  
210  
70  
175  
70  
mA  
mA  
Notes:  
1. For best–practices recommendations, please refer to the Cypress application note System Design Guidelines on www.cypress.com.  
2. CE CE are for TQFP and 165 fBGA package only. 119 BGA is offered only in 1 Chip Enable.  
3,  
2
Cypress Semiconductor Corporation  
•
3901 North First Street  
•
San Jose, CA 95134  
•
408-943-2600  
Document #: 38-05544 Rev. *A  
Revised November 2, 2004  
1234567...29

中文翻译

下载PDF

CY7C1383D-100AXC 替代型号

型号 品牌 替代类型 描述 数据表
CY7C1383D-133AXC CYPRESS

类似代替

 18-Mbit (512K x 36/1M x 18) Flow-Through SRAM

与CY7C1383D-100AXC相关器件

型号 品牌 获取价格 描述 数据表
CY7C1383D-100AXI CYPRESS

获取价格

 		18-Mbit (512K x 36/1M x 18) Flow-Through SRAM
CY7C1383D-100BGC CYPRESS

获取价格

 		18-Mbit (512K x 36/1M x 18) Flow-Through SRAM
CY7C1383D-100BGI CYPRESS

获取价格

 		18-Mbit (512K x 36/1M x 18) Flow-Through SRAM
CY7C1383D-100BGXC CYPRESS

获取价格

 		18-Mbit (512K x 36/1M x 18) Flow-Through SRAM
CY7C1383D-100BGXI CYPRESS

获取价格

 		18-Mbit (512K x 36/1M x 18) Flow-Through SRAM
CY7C1383D-100BZC CYPRESS

获取价格

 		18-Mbit (512K x 36/1M x 18) Flow-Through SRAM
CY7C1383D-100BZI CYPRESS

获取价格

 		18-Mbit (512K x 36/1M x 18) Flow-Through SRAM
CY7C1383D-100BZXC CYPRESS

获取价格

 		18-Mbit (512K x 36/1M x 18) Flow-Through SRAM
CY7C1383D-100BZXI CYPRESS

获取价格

 		18-Mbit (512K x 36/1M x 18) Flow-Through SRAM
CY7C1383D-117AI CYPRESS

获取价格

 		Cache SRAM, 1MX18, 7.5ns, CMOS, PQFP100, 14 X 20 MM, 1.40 MM HEIGHT, PLASTIC, TQFP-100

与CY7C1383D-100AXC相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证