CY7C1336F
2-Mbit (64K x 32) Flow-Through Sync SRAM
Features
• 64K x 32 common I/O
• 3.3V –5% and +10% core power supply (VDD
• 3.3V I/O supply (VDDQ
• Fast clock-to-output times
— 6.5 ns (133-MHz version)
— 7.5 ns (117-MHz version)
Functional Description[1]
The CY7C1336F is a 65,536 x 32 synchronous cache RAM
designed to interface with high-speed microprocessors with
)
minimum glue logic. Maximum access delay from clock rise is
6.5 ns (133-MHz version). A 2-bit on-chip counter captures the
first address in a burst and increments the address automati-
cally for the rest of the burst access. All synchronous inputs
are gated by registers controlled by a positive-edge-triggered
Clock Input (CLK). The synchronous inputs include all
addresses, all data inputs, address-pipelining Chip Enable
)
(
), depth-expansion Chip Enables (CE and
), Burst
CE3
• Provide high-performance 2-1-1-1 access rate
CE1
2
Control inputs (
,
,
), Write Enables
). Asynchronous
and
ADV
ADSC ADSP
• User-selectable burst counter supporting Intel
(
,
and
), and Global Write (
BWE
BW[A:D]
Pentium interleaved or linear burst sequences
GW
(
)
and the ZZ pin
.
nputs include the Output Enable
OE
i
• Separate processor and controller address strobes
• Synchronous self-timed write
• Asynchronous output enable
• Supports 3.3V I/O level
• Offered in JEDEC-standard 100-pin TQFP package
• “ZZ” Sleep Mode option
The CY7C1336F allows either interleaved or linear burst
sequences, selected by the MODE input pin. A HIGH selects
an interleaved burst sequence, while a LOW selects a linear
burst sequence. Burst accesses can be initiated with the
Processor Address Strobe (ADSP) or the cache Controller
Address Strobe (ADSC) inputs. Address advancement is
controlled by the Address Advancement (ADV) input.
Addresses and chip enables are registered at rising edge of
clock when either Address Strobe Processor (
) or
ADSP
Address Strobe Controller (
) are active. Subsequent
ADSC
burst addresses can be internally generated as controlled by
the Advance pin ( ).
ADV
The CY7C1336F operates from a +3.3V core power supply
while all outputs may operate with a +3.3V supply. All inputs
and outputs are JEDEC-standard JESD8-5-compatible.
Logic Block Diagram
ADDRESS
REGISTER
A0, A1, A
A[1:0]
MODE
ADV
CLK
Q1
BURST
COUNTER
AND LOGIC
Q0
CLR
ADSC
ADSP
DQ
D
DQ
BYTE
WRITE REGISTER
D
BYTE
BW
D
WRITE REGISTER
DQ
C
DQ
C
BYTE
BW
C
BYTE
WRITE REGISTER
OUTPUT
BUFFERS
DQs
WRITE REGISTER
MEMORY
ARRAY
SENSE
AMPS
DQ
B
DQ
B
BYTE
BW
B
BYTE
WRITE REGISTER
WRITE REGISTER
DQ
A
BYTE
DQ
A
BW
A
WRITE REGISTER
BYTE
BWE
WRITE REGISTER
INPUT
REGISTERS
GW
ENABLE
REGISTER
CE1
CE2
CE3
OE
SLEEP
CONTROL
ZZ
Note:
1. For best-practices recommendations, please refer to the Cypress application note System Design Guidelines on www.cypress.com.
Cypress Semiconductor Corporation
•
3901 North First Street
•
San Jose, CA 95134
•
408-943-2600
Document #: 38-05386 Rev. *A
Revised April 9, 2004