Datasheet > 存储 > SRAM> CY7C1303BV18-167BZXC

CY7C1303BV18-167BZXC

更新时间： 2024-11-01 13:07:11

品牌	Logo	应用领域
赛普拉斯 - CYPRESS		存储内存集成电路静态存储器时钟
页数	文件大小	规格书
19页	247K
描述
QDR SRAM, 1MX18, 2.5ns, CMOS, PBGA165, 13 X 15 MM, 1.40 MM HEIGHT, LEAD FREE, MO-216, FBGA-165

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

CY7C1303BV18-167BZXC 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Obsolete	零件包装代码：	BGA
包装说明：	LBGA, BGA165,11X15,40	针数：	165
Reach Compliance Code：	compliant	ECCN代码：	3A991.B.2.A
HTS代码：	8542.32.00.41	风险等级：	5.8
Is Samacsys：	N	最长访问时间：	2.5 ns
其他特性：	PIPELINED ARCHITECTURE	最大时钟频率 (fCLK)：	167 MHz
I/O 类型：	SEPARATE	JESD-30 代码：	R-PBGA-B165
JESD-609代码：	e1	长度：	15 mm
内存密度：	18874368 bit	内存集成电路类型：	QDR SRAM
内存宽度：	18	湿度敏感等级：	3
功能数量：	1	端子数量：	165
字数：	1048576 words	字数代码：	1000000
工作模式：	SYNCHRONOUS	最高工作温度：	70 °C
最低工作温度：		组织：	1MX18
输出特性：	3-STATE	封装主体材料：	PLASTIC/EPOXY
封装代码：	LBGA	封装等效代码：	BGA165,11X15,40
封装形状：	RECTANGULAR	封装形式：	GRID ARRAY, LOW PROFILE
并行/串行：	PARALLEL	峰值回流温度（摄氏度）：	260
电源：	1.5/1.8,1.8 V	认证状态：	Not Qualified
座面最大高度：	1.4 mm	最大待机电流：	0.24 A
最小待机电流：	1.7 V	子类别：	SRAMs
最大压摆率：	0.5 mA	最大供电电压 (Vsup)：	1.9 V
最小供电电压 (Vsup)：	1.7 V	标称供电电压 (Vsup)：	1.8 V
表面贴装：	YES	技术：	CMOS
温度等级：	COMMERCIAL	端子面层：	Tin/Silver/Copper (Sn/Ag/Cu)
端子形式：	BALL	端子节距：	1 mm
端子位置：	BOTTOM	处于峰值回流温度下的最长时间：	20
宽度：	13 mm	Base Number Matches：	1

CY7C1303BV18-167BZXC 数据手册

浏览型号CY7C1303BV18-167BZXC的Datasheet PDF文件第2页

浏览型号CY7C1303BV18-167BZXC的Datasheet PDF文件第3页

浏览型号CY7C1303BV18-167BZXC的Datasheet PDF文件第4页

浏览型号CY7C1303BV18-167BZXC的Datasheet PDF文件第5页

浏览型号CY7C1303BV18-167BZXC的Datasheet PDF文件第6页

CY7C1303BV18

CY7C1306BV18

PRELIMINARY

18-Mbit Burst of 2 Pipelined SRAM with

QDR™ Architecture

Features

Functional Description

• Separate independent Read and Write data ports

— Supports concurrent transactions

• 167-MHz Clock for high bandwidth

— 2.5 ns Clock-to-Valid access time

• 2-Word Burst on all accesses

The CY7C1303BV18 and CY7C1306BV18 are 1.8V

Synchronous Pipelined SRAMs equipped with QDR™ archi-

tecture. QDR architecture consists of two separate ports to

access the memory array. The Read port has dedicated Data

Outputs to support Read operations and the Write Port has

dedicated Data inputs to support Write operations. Access to

each port is accomplished through a common address bus.

The Read address is latched on the rising edge of the K clock

and the Write address is latched on the rising edge of K clock.

QDR has separate data inputs and data outputs to completely

eliminate the need to “turn-around” the data bus required with

common I/O devices. Accesses to the CY7C1303BV18/

CY7C1306BV18 Read and Write ports are completely

independent of one another. All accesses are initiated

synchronously on the rising edge of the positive input clock

(K). In order to maximize data throughput, both Read and

Write ports are equipped with Double Data Rate (DDR) inter-

faces. Therefore, data can be transferred into the device on

every rising edge of both input clocks (K and K) and out of the

device on every rising edge of the output clock (C and C, or K

and K when in single clock mode) thereby maximizing perfor-

mance while simplifying system design. Each address location

is associated with two 18-bit words (CY7C1303BV18) or two

36-bit words (CY7C1306BV18) that burst sequentially into or

out of the device.

• Double Data Rate (DDR) interfaces on both Read and

Write Ports (data transferred at 333 MHz) @167 MHz

• Two input clocks (K and K) for precise DDR timing

— SRAM uses rising edges only

• Two output clocks (C and C) account for clock skew

and flight time mismatching

• Single multiplexed address input bus latches address

inputs for both Read and Write ports

• Separate Port Selects for depth expansion

• Synchronous internally self-timed writes

• 1.8V core power supply with HSTL Inputs and Outputs

• 13 x 15 x 1.4 mm 1.0-mm pitch fBGA package, 165 ball

(11x15 matrix)

• Variable drive HSTL output buffers

• Expanded HSTL output voltage (1.4V–1.9V)

• JTAG Interface

Depth expansion is accomplished with a Port Select input for

each port. Each Port Selects allow each port to operate

independently. 38-05626

• Variable Impedance HSTL

All synchronous inputs pass through input registers controlled

by the K or K input clocks. All data outputs pass through output

registers controlled by the C or C input clocks. Writes are

conducted with on-chip synchronous self-timed write circuitry.

Configurations

CY7C1303BV18 – 1M x 18

CY7C1306BV18 – 512K x 36

Cypress Semiconductor Corporation

Document #: 38-05626 Rev. **

•

3901 North First Street

•

San Jose, CA 95134

•

408-943-2600

Revised July 29, 2004

12 3 4 5 6 7...19

中文翻译

下载PDF

与CY7C1303BV18-167BZXC相关器件

型号	品牌	获取价格	描述	数据表
CY7C1303BV18-167BZXI	CYPRESS	获取价格	QDR SRAM, 1MX18, 2.5ns, CMOS, PBGA165, 13 X 15 MM, 1.40 MM HEIGHT, LEAD FREE, MO-216, FBGA
CY7C1303BV25	CYPRESS	获取价格	RAM9 QDR-I/DDR-I/QDR-II/DDR- II Errata
CY7C1303BV25_12	CYPRESS	获取价格	18-Mbit Burst of Two-Pipelined SRAM with QDRÂ
CY7C1303BV25-133BZC	CYPRESS	获取价格	QDR SRAM, 1MX18, 3ns, CMOS, PBGA165, 13 X 15 MM, 1.40 MM HEIGHT, 1 MM PITCH, FBGA-165
CY7C1303BV25-167BZC	CYPRESS	获取价格	18-Mbit Burst of 2 Pipelined SRAM with QDR⑩ A
CY7C1303BV25-167BZI	CYPRESS	获取价格	18-Mbit Burst of 2 Pipelined SRAM with QDR⑩ A
CY7C1303BV25-167BZXC	CYPRESS	获取价格	18-Mbit Burst of 2 Pipelined SRAM with QDR⑩ A
CY7C1303BV25-167BZXI	CYPRESS	获取价格	18-Mbit Burst of 2 Pipelined SRAM with QDR⑩ A
CY7C1303CV25	CYPRESS	获取价格	18-Mbit Burst of 2 Pipelined SRAM with QDR Architecture
CY7C1303CV25-167BZC	CYPRESS	获取价格	18-Mbit Burst of 2 Pipelined SRAM with QDR Architecture

与CY7C1303BV18-167BZXC相关文章

三星深化印度制造布局，供应链本地化进程加速
2024-10-29

22
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

23
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
2024-10-18

46
意法半导体发布第四代SiC技术，助力电动汽车电驱
2024-10-15

54

产品中心

服务支持

精选活动

关于我们

帮助中心

CY7C1303BV18-167BZXC

CY7C1303BV18-167BZXC 技术参数

CY7C1303BV18-167BZXC 数据手册

与CY7C1303BV18-167BZXC相关器件

与CY7C1303BV18-167BZXC相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

CY7C1303BV18-167BZXC

CY7C1303BV18-167BZXC 技术参数

CY7C1303BV18-167BZXC 数据手册

与CY7C1303BV18-167BZXC相关器件

与CY7C1303BV18-167BZXC相关文章

您还可以找

您在本页遇到什么问题？