CY2SSTU877
1.8V, 500 MHz, 10-Output JEDEC-Compliant Zero Delay Buffer
distributes a differential clock input pair (CK, CK#) to ten differ-
ential pair of clock outputs (Y[0:9], Y#[0:9]) and one differential
pair of feedback clock outputs (FBOUT, FBOUT#).
Features
• Operating frequency: 125 MHz to 500 MHz
• Supports DDRII SDRAM
The input clocks (CK, CK#), the feedback clocks (FBIN,
FBIN#), the LVCMOS (OE, OS), and the analog power input
(AVDD) control the clock outputs.
• 1 to 10 differential clock buffer (SSTL_18)
• Spread-Spectrum-compatible
• Low jitter (cycle-to-cycle): 40 ps
• Very low output-to-output skew: 40 ps
• Auto power-down feature when input is low
• 1.8V operation
The PLL in the CY2SSTU877 clock driver uses the input
clocks (CK, CK#) and the feedback clocks (FBIN, FBIN#) to
provide high-performance, low-skew, low-jitter output differ-
ential clocks (Y[0:9], Y#[0:9]). The CY2SSTU877 is also able
to track Spread Spectrum Clocking (SSC) for reduced EMI.
When AVDD is grounded, the PLL is turned off and bypassed
for test purposes. When both clock signals (CK, CK#) are logic
low, the device will enter a low-power mode. An input logic
detection circuit on the differential inputs, independent from
the input buffers, will detect the logic low level and perform a
low-power state where all outputs, the feedback, and the PLL
are OFF. When the inputs transition from both being logic low
to being differential signals, the PLL will be turned back on, the
inputs and outputs will be enabled and the PLL will obtain
phase lock between the feedback clock pair (FBIN, FBIN#)
and the input clock pair (CK, CK#) within the specified stabili-
zation time tL.
• Fully JEDEC-compliant (JESD 82-8)
• 52-ball BGA
Functional Description
The CY2SSTU877 is a high-performance, low-skew, low-jitter
zero delay buffer designed to distribute differential clocks in
high-speed applications.
This phase-locked loop (PLL) clock buffer is designed for a
VDD of 1.8V, an AVDD of 1.8V and SSTL18 differential data
input and output levels. This device is a zero delay buffer that
Pin Configuration
Block Diagram
1
2
3
4
5
6
CLKT1
CLKC1
CLKC2
CLKT2
CLKT0
GND
CLKC0 CLKC5 CLKT5
CLKT6
CLKC6
CLKC7
CLKT7
FB_INT
FB_INC
A
B
C
D
E
F
GND
NB
GND
NB
GND
GND
OS
GND
VDDQ
VDDQ
NB
VDDQ
NB
CLK_INT VDDQ
CLK_INC VDDQ
VDDQ
OE
NB
NB
AGND
AVDD
CLKT3
VDDQ
GND
GND
VDDQ
NB
VDDQ
NB
VDDQ FB_OUTC
GND FB_OUTT
G
H
J
GND
GND
CLKT9
GND
CLKT8
CLKC3 CLKC4 CLKT4
CLKC9 CLKC8
K
52 BGA
Rev 1.0, November 21, 2006
Page 1 of 8
2200 Laurelwood Road, Santa Clara, CA 95054
Tel:(408) 855-0555 Fax:(408) 855-0550
www.SpectraLinear.com