5秒后页面跳转
CY2308SI-4T PDF预览

CY2308SI-4T

更新时间: 2024-01-18 07:00:54
品牌 Logo 应用领域
赛普拉斯 - CYPRESS /
页数 文件大小 规格书
15页 367K
描述
3.3V Zero Delay Buffer

CY2308SI-4T 数据手册

 浏览型号CY2308SI-4T的Datasheet PDF文件第2页浏览型号CY2308SI-4T的Datasheet PDF文件第3页浏览型号CY2308SI-4T的Datasheet PDF文件第4页浏览型号CY2308SI-4T的Datasheet PDF文件第5页浏览型号CY2308SI-4T的Datasheet PDF文件第6页浏览型号CY2308SI-4T的Datasheet PDF文件第7页 
CY2308  
3.3V Zero Delay Buffer  
Input Decoding” on page 2”. If all output clocks are not  
required, Bank B is three-stated. The input clock is directly  
applied to the output for chip and system testing purposes by  
the select inputs.  
Features  
Zero input-output propagation delay, adjustable by  
capacitive load on FBK input  
The CY2308 PLL enters a power down state when there are  
no rising edges on the REF input. In this mode, all outputs are  
three-stated and the PLL is turned off resulting in less than  
50 μA of current draw. The PLL shuts down in two additional  
cases as shown in the table “Select Input Decoding” on  
page 2.  
Multiple configurations, see “Available CY2308 Configura-  
tions” on page 3  
Multiple low skew outputs  
Two banks of four outputs, three-stateable by two select  
inputs  
Multiple CY2308 devices accept the same input clock and  
distribute it in a system. In this case, the skew between the  
outputs of two devices is less than 700 ps.  
10 MHz to 133 MHz operating range  
75 ps typical cycle-to-cycle jitter (15 pF, 66 MHz)  
Spacesaving16-pin 150milSOICpackageor16-pinTSSOP  
3.3V operation  
The CY2308 is available in five different configurations as  
shown in the table “Available CY2308 Configurations” on  
page 3. The CY2308–1 is the base part where the output  
frequencies equal the reference if there is no counter in the  
feedback path. The CY2308–1H is the high drive version of the  
–1 and rise and fall times on this device are much faster.  
Industrial Temperature available  
Functional Description  
The CY2308–2 enables the user to obtain 2X and 1X  
frequencies on each output bank. The exact configuration and  
output frequencies depend on the output that drives the  
feedback pin. The CY2308–3 enables the user to obtain 4X  
and 2X frequencies on the outputs.  
The CY2308 is a 3.3V Zero Delay Buffer designed to distribute  
high speed clocks in PC, workstation, datacom, telecom, and  
other high performance applications.  
The part has an on-chip PLL that locks to an input clock  
presented on the REF pin. The PLL feedback is driven into the  
FBK pin and obtained from one of the outputs. The  
input-to-output skew is less than 350 ps and output-to-output  
skew is less than 200 ps.  
The CY2308–4 enables the user to obtain 2X clocks on all  
outputs. Thus, the part is extremely versatile and is used in a  
variety of applications.  
The CY2308–5H is a high drive version with REF/2 on both  
banks.  
The CY2308 has two banks of four outputs each that is  
controlled by the Select inputs as shown in the table “Select  
Logic Block Diagram  
/2  
FBK  
PLL  
REF  
MUX  
/2  
CLKA1  
CLKA2  
CLKA3  
CLKA4  
Extra Divider (–3, –4)  
Extra Divider (–5H)  
S2  
Select Input  
Decoding  
S1  
/2  
CLKB1  
CLKB2  
CLKB3  
CLKB4  
Extra Divider (–2, –3)  
Cypress Semiconductor Corporation  
Document Number: 38-07146 Rev. *E  
198 Champion Court  
San Jose, CA 95134-1709  
408-943-2600  
Revised August 03, 2007  
[+] Feedback  

与CY2308SI-4T相关器件

型号 品牌 获取价格 描述 数据表
CY2308SI-5H CYPRESS

获取价格

3.3V Zero Delay Buffer
CY2308SI-5HT CYPRESS

获取价格

PLL Based Clock Driver, 2308 Series, 8 True Output(s), 0 Inverted Output(s), CMOS, PDSO16,
CY2308SXC-1 CYPRESS

获取价格

3.3V Zero Delay Buffer
CY2308SXC-1 INFINEON

获取价格

3.3V Zero Delay Buffer
CY2308SXC-1H CYPRESS

获取价格

3.3V Zero Delay Buffer
CY2308SXC-1H INFINEON

获取价格

3.3V Zero Delay Buffer
CY2308SXC-1HT CYPRESS

获取价格

3.3V Zero Delay Buffer
CY2308SXC-1HT INFINEON

获取价格

3.3V Zero Delay Buffer
CY2308SXC-1T CYPRESS

获取价格

3.3V Zero Delay Buffer
CY2308SXC-1T INFINEON

获取价格

3.3V Zero Delay Buffer