CY14V101PS
1-Mbit (128K × 8) Quad SPI nvSRAM with
Real Time Clock
■ Temperature range
❐ Industrial: –40 °C to 85 °C
Features
■ Density
❐ 1 Mbit (128K × 8)
■ Packages
❐ 16-pin SOIC
■ Bandwidth
❐ 108-MHz high-speed interface
❐ Read and write at 54 MBps
Functional Overview
The Cypress CY14V101PS combines a 1-Mbit nvSRAM with a
QPI interface. The QPI allows writing and reading the memory in
either a single (one I/O channel for one bit per clock cycle), dual
(two I/O channels for two bits per clock cycle), or quad (four I/O
channels for four bits per clock cycle) through the use of selected
opcodes.
■ Serial Peripheral Interface
❐ Clock polarity and phase modes 0 and 3
❐ Multi I/O option – Single SPI (SPI), Dual SPI (DPI), and Quad
SPI (QPI)
■ High reliability
❐ Infinite read, write, and RECALL cycles
❐ One million STORE cycles to nonvolatile elements (SONOS
FLASH Quantum trap)
The memory is organized as 128 Kbytes each consisting of
SRAM and nonvolatile SONOS FLASH Quantum Trap cells. The
SRAM provides infinite read and write cycles, while the
nonvolatile cells provide highly reliable storage of data. Data
transfers from SRAM to the nonvolatile cells (STORE operation)
take place automatically at power-down. On power-up, data is
restored to the SRAM from the nonvolatile cells (RECALL
operation). The user can initiate the STORE and RECALL
operations through SPI instructions.
❐ Data retention: 20 years at 85 °C
■ Read
❐ Commands: Standard, Fast, Dual I/O, and Quad I/O
❐ Modes: Burst Wrap, Continuous (XIP)
■ Write
❐ Commands: Standard, Fast, Dual I/O, and Quad I/O
❐ Modes: Burst Wrap
■ Data protection
❐ Hardware: Through Write Protect Pin (WP)
❐ Software: Through Write Disable instruction
❐ Block Protection: Status Register bits to control protection
■ Special instructions
❐ STORE/RECALL: Transfer data between SRAM and
Quantum Trap nvSRAM
❐ Serial Number: 8-byte customer selectable (OTP)
❐ Identification Number: 4-byte Manufacturer ID and Product
ID
■ Store from SRAM to nonvolatile SONOS FLASHQuantum Trap
❐ AutoStore: Initiated automatically at power-down with a small
capacitor (VCAP
)
❐ Software: Using SPI instruction (STORE)
❐ Hardware: HSB pin
■ Recall from nonvolatile SONOS FLASH Quantum Trap to
SRAM
❐ Auto RECALL: Initiated automatically at power-up
❐ Software: Using SPI instruction (RECALL)
■ Low-power modes
❐ Sleep: Average current = 380 µA at 85 °C
❐ Hibernate: Average current = 8 µA at 85 °C
■ Operating supply voltages
❐ Core VCC: 2.7 V to 3.6 V
❐ I/O VCCQ: 1.71 V to 2.0 V
Cypress Semiconductor Corporation
Document Number: 001-94176 Rev. *J
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised November 24, 2017