CHKD
LHJ
CHKD
Rev.
Count
Description of rev.
Preliminary drawing
BY
Date
Rev.
Count
Description of rev.
BY
Date
22.11.04
-
-
-
KYI
23.03.10
1
RE-2-2146(M.P release) KYJ
LHJ
Universal Serial Bus Type-C Cable and Connector Specification Release 2.1
Universal Serial Bus Type-C Connectors and Cable Assemblies Compliance Document Revision 2.1b
Applicable standard
Rating
Voltage 48V AC/DC
1.25A max. for each power pin (i.e., A1, A4, A9, A12, B1, B4, B9, B12)
Current 1.25A max. for Vcon pin (i.e., B5)
0.25A max. for the others.
Operating condition
Storage condition
-40℃~+105℃(Including temp. rise), 95% RH max.(Non-condensing)
-10℃~+60℃(With packing), 15%~70% RH
SPECIFICATIONS
No
TEST ITEM
TEST METHOD
TEST REQUIREMENT
QT
O
AT
O
CONSTRUCTION
EIA 364-18
General Examination
No physical damage
1
Visual inspection
ELECTRICAL CHARACTERISTICS
EIA 364-23
Measure at 20mV max open circuit
at 100mA max. (DC or 1000Hz)
Low level contact
resistance
Initial : 40mΩ max
2
O
-
4-wire measurement is required and
the resistance of PCB termination
shall be deducted from the reading.
EIA 364-20
After test : 50mΩ max
Dielectric
Measure per Method B with
No disruptive discharge.
100MΩ min.
3
4
O
O
-
-
Withstanding Voltage
unmated condition.
100V AC RMS for 1 minute at sea level.
EIA 364-21
Insulation resistance
Temperature Rise
500V DC with unmated and mated condition.
IEC60529, EIA-364-70, method B :
A current of 6.0 A shall be applied collectively to
VBUS pins (i.e., pins A4, A9, B4, and B9) and 1.25 A
applied to the Vconn pin (i.e., B5 of the plug
connector) with the return path through the
corresponding GND pins (i.e., pins A1, A12, B1, and
B12). A minimum current of 0.25 A shall also be
applied individually to all the other contacts.
Temperature rise shall not
exceed 30℃
5
O
-
MECHANICAL CHARACTERISTICS
Insertion force
EIA 364-13
Initial & after test : 5N ~ 20N
6
O
O
-
-
Measure at 12.5mm/minute min.
EIA 364-13
Extraction force
Initial : 8N ~ 20N
After test : 6N ~ 20N
(with virgin plug)
7
Measure at 12.5mm/minute min.
Durability
EIA 364-09
No physical damage.
8
O
-
Mated 10,000 times
Remarks
Drawn
Y.I.KIM
Designed
S.K.JANG
22.06.29
Checked
H.J.LEE
Approved
H.J.LEE
Release
22.06.29
22.06.29
22.06.29
[Note] QT : Qualification test, AT : Assurance test, O : Applicable, - : Not applicable
Drawing No. CL No. Part No.
ELC4-633737
CL 6251-0001-2
CX81B-24S
PRODUCT SPECIFICATION
1
HIROSE KOERA.CO.,LTD
3