SPECIFICATION CONTROL DRAWING
Product Revision
Product
Product Dimensions
Wire and Pin Dimensions
øA
L
øB
øC
øC
øD
Name
min
min
max
min
max
max
CWT-1501
CWT-1502
CWT-1503
CWT-1504
A
1.5 (0.060)
2.3 (0.090)
2.8 (0.110)
3.8 (0.150)
1.5 (0.060)
2.3 (0.090)
2.8 (0.110)
3.8 (0.150)
2.0 (0.080)
2.9 (0.115)
3.2 (0.125)
4.5 (0.180)
0.9 (0.035)
1.1 (0.045)
1.6 (0.065)
1.8 (0.070)
1.5 (0.060)
2.3 (0.090)
2.8 (0.110)
3.8 (0.150)
0.6 (0.025)
0.9 (0.035)
1.2 (0.045)
1.5 (0.060)
A
A
A
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI-J-STD-006.
FLUX:
TYPE ROM1 per ANSI-J-STD-004.
APPLICATION
1. These controlled soldering devices are designed for termination of a wire to the lead of electrical component or to the terminal
of a connector.
2. Temperature range: -55C to +125C.
3. For installation procedure and application equipment, consult RPIP-824-00
For best results, prepare the cable as shown:
Stripping Dimensions
1) Wires smaller than AWG 18:
E: 6.5±0.5
F: 8.0±0.5
2) Wires AWG 18 and larger:
E: 9.5±0.5
F: 11.0±0.5
TITLE :
TE Connectivity
300 Constitutional Drive
Menlo Park, CA 94025 USA
Solder Sleeve One Step
Wire Terminator Low Temperature
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: CWT-150X
TOLERANCES:
0.00 N/A
0.0 N/A
ANGLES: N/A
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
DATE:
DOC ISSUE:
15-Apr-11
7
ROUGHNESS IN
MICRON
0 N/A
DRAWN BY:
CAGE CODE:
REPLACES:
DCR NUMBER:
PROD. REV.:
SCALE:
SIZE:
SHEET:
M. FORONDA
06090
D980899
D010038
SEE TABLE
None
A
1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check with the web for the latest revision