DC-DC Converter UNIT
CW SERIES (10W~12W Wide Input Range)
FEATURES
•10W to 12W dil package
•9-18V, 18-36V, 36-72V Wide Input Range
•100% Burned in
•High efficiency
•UL 94V-0 Package material
•Costum solutions available
•RoHS compliant
•3 Years warranty
OUTPUT SPECIFICATIONS
Voltage Set point Accuracy
INPUT SPECIFICATIONS
+/-2% max
+/-0.05%/
Input Voltage Range
2:1 Input Range
Temperature Coefficient
°
C
Input Filter
Pi Network
Ripple & Noise (20MHz BW)1
100mVp-p max
Protection
Fuse Recommended
Line Regulation2
Load Regulation3
+/-0.5% max
+/-0.5% max
20% of Full Load
Continuous
GENERAL SPECIFICATIONS
Efficiency
78% min
Minimum Load
Isolation Voltage4
1500 VDC min
Short Circuit Protection
Short Circuit Restart
Transient Response5
Over Load Protection
109 ohms min
2200pF max
400 KHz Typ
Automatic
Isolation Resistance
Isolation Capacitance
350uS max
100% ~180%
Switching Frequency
MTBF6
>600,000 Hours
18.5g Typ
Weight
ENVIRONMENTAL SPECIFICATIONS
Case Material
Case Size
Five-sided shield case
31.8mm*20.3mm*12.2mm
Operating Temperature
-40
°
C to +85
C to +105
95%
95% max
Free-Air Convection
°
C
Storage Temperature
Case Temperature
Humidity
Potting Material
Epoxy (UL94-V0)
EN55022 Class A
EN55022 Class A
-55
°
°
C
Conducted Emissions
Radiated Emissions
°
C max
Remote On / Off
-On
Cooling
3.0…12V/DC or open circuit
(referenced to-Vin)
0…1.2V/DC or short circuit
(pin 1 and pin 2/3)
-Off
-Off idle current
2.5 mA
ALL SPECIFICATIONS TYPICAL AT NOMINAL LINE, FULL LOAD , AND 25 °C UNLESS OTHERWISE NOTED.
[1] Measured with 1uF ceramic capacitor connect to the output pins.
[2] High Line to Low Line.
[3] Load Regulation is for output load current change from 20% to 100%.
[4] 1500Vdc for 10 seconds
[5] 25% Step Load Change.
[6] MIL-HDBK-217F @25 °C , Ground Benign.
Power Systems – The Power Solution
Web:
www.Power-Systems.de
Info@Power-Systems.de
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany
Email:
Tel. :
Fax:
+ 49 / 70 62 / 67 59 - 6
+ 49 / 70 62 / 67 59 - 800
All specifications are subject to change without notice.
Page (1)
Version 1.0, 20th May 2008