VADS-5512 Single/Double Output with Battery Charger
•
Features
·Low cost
·High reliability
·105°C output capacitor
·Universal AC input range
·High efficiency, low temperature rise
·Soft-start circuit, limiting AC surge current
·Short circuit, overload, battery protected
·Compact size, light weight
·100% full load burn-in test
·Built in EMI filter, low ripple noise
·Battery low / Battery polarity protections
CH1
CH2
DC output voltage
Output V. tolerance
Output rated current
Output current range
Ripple & noise
12V
5V
±1%
±3%
3A
3A
0-4A
0-4A
150mVp-p
±0.5%
±0.5%
51W
100mVp-p
±0.5%
±0.5%
Line regulation
Load regulation
DC output power
Efficiency
74%
DC voltage adj.
Input voltage range
AC current
±10%
fixed
88~264VAC 47~63Hz; 124~370VDC
1.6A/115V 1A/230V
Inrush current
cold start 20A/115V 40A/230V
Leakage current
Overload protection
<1mA/240VAC
105%~150% / 230 VAC,
Hiccup mode, recovers automatically after fault condition is removed
CH1: 115%~135% type: pulse by pulse
±0.03% / ºC (0~50ºC)
Over voltage protection
Temperature coefficient
Set up, rise, hold up time
Vibration
1.6s, 50ms, 16ms/115VAC 800ms, 50ms, 60ms / 230VAC
10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes
I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min.
I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms min.
-10°C~+60% (refer to output derating curve), 20%-90% RH
-20°C~+85°C, 10%-95% RH
Withstand voltage
Isolation resistance
Working temp., humidity
Storage temp., humidity
Dimensions
6.26x3.82x1.50 inches (159x97x38 mm) Case: 901
1.26 lb. (0.57 Kgs)
Weight
Safety standards
EMC standards
UL1950, TUV EN60950 approved
CISPR22 (EN55022) CLASS B, EN61000-3-2,3; EN61000-4-2,3,4,5,6,8,11; ENV50204
Notes:
1. All parameters are specified at 230VAC input, rated load, 25°C, 70% RH ambient
2. Tolerance includes set up tolerance, line regulation, load regulation
3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor
4. Line regulation is measured from low line to high line at rated load
5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load
6. Each output provides up to maximum current, but total load can not exceed maximum output power
*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus-
tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus-
tomer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub-
lished specifications. Nothing will be covered outside of standard product warranty.
V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005
www.v-infinity.com
1-866-372-1258