CTR (Low Ohms)
Vishay Electro-Films
www.vishay.com
Thin Film Low Ohmic Value Resistor Divider Network
FEATURES
• Wire bondable
• Resistance range total: 1 to 9.9
• Center tap
• Chip size: 0.030" x 0.030"
• Case: 0303
Product may not be to scale
• Oxidized silicon substrate for good power
dissipation
LINKS TO ADDITIONAL RESOURCES
• Resistor material: tantalum nitride, self passivating
3
D
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3D Models
The CTR low ohm series provides a center tap option down
to 1 for non-critical tolerance applications.
APPLICATIONS
For low values, the resistance of the six bonding pad
configurations can vary, depending on the method of
measurement used. Vishay EFI measures low value resistors
by the four-wire kelvin technique using the method
illustrated in the measurement schematic for resistors of
less than 10.
The CTRs are manufactured using Vishay Electro-Films (EFI)
sophisticated thin film equipment and manufacturing
technology. The CTRs are 100 % electrically tested and
visually inspected to MIL-STD-883, method 2032 class H
or K.
Consult Vishay EFI Applications Engineering for alternate
measurement method if tighter requirements are needed.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
UNIT
Total Resistance Range
Standard Tolerances
TCR
1 to 9.9
± 1, ± ±
%
± 100, + 600
ppm/°C
Tightest Standard Tolerance Available
1.0 %
5 %
+600 to -100 ppm/°C
100 ppm/°C
1 ꢀ
5.1 ꢀ
9.9 ꢀ
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
VALUE
± 200 typ.
1 ± ±
UNIT
ppm/°C
%
TCR Tracking Between Halves (RA/RB)
Voltage Ratio, RA/RB: Tolerance
Noise, MIL-STD-202, Method 308
- 20 typ.
dB
Stability, 1000 h, + 12± °C, 12± mW
± 0.2± ± 0.01 max. R/R
- ±± to + 12±
%
Operating Temperature Range
°C
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 1±0 °C, 100 h
DC Power Rating at 70 °C (derated to zero at + 17± °C)
± x Rated Power Short-Time Overload, + 2± °C, ± s
± 0.1 max. R/R
± 0.2 + 0.01 max. R/R
0.2±
%
%
W
± 0.1 max. R/R
%
Revision: 26-Oct-2020
Document Number: 61028
1
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000