Document 915-1
Current Sense Transformers CST4835
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
• Miniature SMT design, only 4.5 × 4.8 mm footprint
• 500 Vrms, one minute isolation (hipot) between windings
• Designed for use up to 1 MHz to sense continuous currents
to 7 Amps
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant silver over nickel over phos bronze.
Weight 115 – 122 mg
Ambient temperature –40°C to +125°C
Maximum part temperature +165°C (ambient + temp rise)
Storage temperature Component: –40°C to +165°C.
Tape and reel Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 500/7″ reel; 2200/13″ reel; Plastic tape: 12 mm wide,
0.35 mm thick, 8 mm pocket spacing, 3.6 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
DCR max
Frequency
range
Volt-time
product3
(Vµsec)
Sensed
current Iin
max (A)
Terminating
resistance RT
(Ohms)
(Ohms)
4
5
Turns (N)
pri:sec
Inductance2
min (µH)
Part number1
pri
sec
(kHz)
CST4835-020E_
CST4835-030E_
CST4835-040E_
CST4835-050E_
CST4835-060E_
1:20
1:30
1:40
1:50
1:60
33
74
132
205
295
0.003
0.003
0.003
0.003
0.003
0.35
0.90
1.60
2.50
3.60
83 – 1000
56 – 1000
42 – 1000
33 – 1000
28 – 1000
6.0
9.0
12.0
15.0
18.0
7
7
7
7
7
2.9
4.3
5.7
7.1
8.6
CST4835-070E_
CST4835-100E_
CST4835-125E_
CST4835-150E_
1:70
400
820
1280
1800
0.003
0.003
0.003
0.003
4.60
9.50
13.0
21.0
24 – 1000
17 – 1000
13 – 1000
11 – 1000
21.0
30.0
37.5
45.0
7
7
7
7
10.0
14.3
17.9
21.4
1:100
1:125
1:150
1. When ordering, please specify packaging code:
CST4835-150EC
6 Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic
tape (500 parts per full reel).
B =Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D =13″ machine-ready reel. EIA-481 embossed plastic
4
2
tape (2200 parts per full reel).
2. Inductance measured between secondary pins at 100 kHz, 0.1 Vrms,
0 Adc.
3. Maximum volt-time product is for the secondary, based on 2000 Gauss.
4. Primary current of 7 A causes less than 25°C temperature rise from
25°C ambient. Higher current causes a greater temperature rise (see
Temperature Rise vs Current curve).
5. Terminating resistance (RT) value is based on 1 Volt output with 7 Amps
flowing through the primary. Varying terminating resistance increases or
decreases output Voltage/Ampere according to the following equation:
RT = Vout × Nsec/Iin.
Pri
Sec
Iin
R
T
Vout
(1 turn)
(N turns)
3
1
Document 915-1 Revised 04/25/16
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.