CSOM
Vishay Dale Thin Film
www.vishay.com
Sandwich, 25 mil Pitch, Dual In-Line Thin Film Resistor,
Surface Mount Network
FEATURES
• Lead (Pb)-free gold plated terminals standard
• Gold-to-gold terminations. External leads are
attached directly to gold pads on the ceramic
substrate by thermo-compression bonding (no
internal solder)
• Tighter tolerances than molded standards (0.01 %)
• Ceramic package with no cavity
• Flexibility of lead variations to save PC board space
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
A dual-in-line monolithic ceramic sandwich in a variety
of pin sizes (14 to 24) that allow higher resistance integration
than traditional chip and wire molded construction. In
addition, tighter resistance tolerances can be obtained over
traditional molded networks due to the elimination of
molding temperature and stress.
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
TYPICAL PERFORMANCE
ABSOLUTE
25
TRACKING
5
TCR
TOL.
ABSOLUTE
0.1
RATIO
0.02
SCHEMATIC
Custom schematics available
Please consult factory
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Tantalum nitride or passivated nichrome (1)
CONDITIONS
Material
-
Pin/Lead Number
Resistance Range
TCR: Absolute
14 to 24
100 to 500 k total
25 ppm/°C to 50 ppm/°C
5 ppm/°C (typical)
0.05 % to 1.0 %
0.02 % to 0.1 %
100 mW
-
-
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Per element at + 70 °C
Maximum at + 70 °C
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
500 mW
R 0.1 %
R 0.0ꢀ %
2000 h at + 70 °C
2000 h at + 70 °C
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
0.1 ppm/V
-
-
-
-
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - ꢀ0 dB
-
Thermal EMF
0.08 μV/°C
-
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
R 0.01 %
R 0.002 %
1 year at + 25 °C
1 year at + 25 °C
Note
(1)
Passivated nichrome is not standard film type for CSOM series, consult factory if required
Revision: 05-Sep-12
Document Number: 60121
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000