CS61535A
T1/E1 Line Interface
Features
General Description
The CS61535A combines the complete analog transmit
and receive line interface for T1 or E1 applications in a
low power, 28-pin device operating from a +5V supply.
Provides Analog PCM Line Interface
for T1 and E1 Applications
•
The device features a transmitter jitter attenuator mak-
ing it ideal for use in asynchronous multiplexor systems
with gapped transmit clocks. The CS61535A provides a
matched, constant impedance output stage to insure
signal quality on mismatched, poorly terminated lines.
Provides Line Driver, and Data and
Clock Recovery Functions
•
Transmit Side Jitter Attenuation
Starting at 6 Hz, with > 300 UI of Jitter
Tolerance
•
Both ICs use a digital Delay-Locked-Loop clock and
data recovery circuit which is continuously calibrated
from a crystal reference to provide excellent stability
and jitter tolerance.
Applications
Low Power Consumption
(typically 175 mW)
•
• Interfacing network transmission equipment such as
SONET multiplexor and M13 to a DSX-1 cross connect.
B8ZS/HDB3/AMI Encoders/Decoders
•
•
•
• Interfacing customer premises equipment to a CSU.
• Interfacing to E1 links.
14 dB of Transmitter Return Loss
Compatible with SONET, M13 , CCITT
G.742, and Other Asynchronous
Muxes
Ordering Information
CS61535A-IP1 28 Pin Plastic DIP
CS61535A-IL1 28 Pin PLCC (j-leads)
[ ] = Pin Function in
Extended Hardware Mode
(CLKE) (INT) (SDI) (SDO)
( ) = Pin Function in Host Mode
XTALIN XTALOUT MODE TAOS LEN0 LEN1 LEN2
TGND TV+
9
10
5
28
23
24
25
14
15
13
16
TTIP
2
TCLK
JITTER
ATTENUATOR
PULSE
SHAPER
CONTROL
3
4
TRING
TPOS
[TDATA]
TNEG
[TCODE]
RCLK
LINE DRIVER
AMI,
B8ZS,
HDB3
LINE RECEIVER
19
RTIP
8
CLOCK &
DATA
CODER
20
17
7
RECOVERY
RRING
RPOS
[RDATA]
RNEG
LOOP
BACK
6
MTIP
SIGNAL
QUALITY
MONITOR
[RCODE]
MRING
[PCS]
DPM
[BPV]
DRIVER
MONITOR
18
11
26
27
1
12
21
22
[AIS]
RLOOP LLOOP
(CS) (SCLK)
ACLKI LOS
RV+ RGND
Crystal Semiconductor Corporation
P.O. Box 17847, Austin, TX 78760
(512) 445-7222 FAX: (512) 445-7581
MAY ’96
DS40F2
1
Copyright Crystal Semiconductor Corporation 1996
(All Rights Reserved)