CS5531/32/33/34-AS
16-bit and 24-bit ADCs with Ultra-low-noise PGIA
Features
General Description
The CS5531/32/33/34 are highly integrated ∆Σ Analog-
to-Digital Converters (ADCs) which use charge-balance
techniques to achieve 16-bit (CS5531/33) and 24-bit
(CS5532/34) performance. The ADCs are optimized for
measuring low-level unipolar or bipolar signals in weigh
scale, process control, scientific, and medical
applications.
Chopper-stabilized PGIA (Programmable
Gain Instrumentation Amplifier, 1x to 64x)
– 12 nV/√Hz @ 0.1 Hz (No 1/f noise) at 64x
– 1200 pA Input Current with Gains >1
Delta-sigma Analog-to-digital Converter
– Linearity Error: 0.0007% FS
– Noise Free Resolution: Up to 23 bits
To accommodate these applications, the ADCs come as
either two-channel (CS5531/32) or four-channel
(CS5533/34) devices and include a very low noise chop-
per-stabilized instrumentation amplifier (6 nV/√Hz @ 0.1
Hz) with selectable gains of 1×, 2×, 4×, 8×, 16×, 32×, and
64×. These ADCs also include a fourth order ∆Σ modu-
lator followed by a digital filter which provides twenty
selectable output word rates of 6.25, 7.5, 12.5, 15, 25, 30,
50, 60, 100, 120, 200, 240, 400, 480, 800, 960, 1600,
1920, 3200, and 3840 Sps (MCLK = 4.9152 MHz).
Two- or Four-channel Differential MUX
Scalable Input Span via Calibration
– ±5 mV to differential ±2.5V
Scalable V
Input: Up to Analog Supply
REF
Simple Three-wire Serial Interface
– SPI™ and Microwire™ Compatible
– Schmitt Trigger on Serial Clock (SCLK)
To ease communication between the ADCs and a micro-
controller, the converters include a simple three-wire se-
rial interface which is SPI and Microwire compatible with
a Schmitt-trigger input on the serial clock (SCLK).
R/W Calibration Registers Per Channel
Selectable Word Rates: 6.25 to 3,840 Sps
Selectable 50 or 60 Hz Rejection
Power Supply Configurations
– VA+ = +5 V; VA- = 0 V; VD+ = +3 V to +5 V
– VA+ = +2.5 V; VA- = -2.5 V; VD+ = +3 V to +5 V
– VA+ = +3 V; VA- = -3 V; VD+ = +3 V
High dynamic range, programmable output rates, and
flexible power supply options makes these ADCs ideal
solutions for weigh scale and process control
applications.
ORDERING INFORMATION
See page 47
VA+
C1
C2
VREF+ VREF-
VD+
CS
AIN1+
AIN1-
AIN2+
AIN2-
DIFFERENTIAL
TH ORDER ∆Σ
MODULATOR
PGIA
1,2,4,8,16
32,64
PROGRAMMABLE
SINC FIR FILTER
4
SDI
SERIAL
INTERFACE
SDO
MUX
SCLK
(CS5533/34
SHOWN)
AIN3+
AIN3-
CLOCK
GENERATOR
CALIBRATION
SRAM/CONTROL
LOGIC
LATCH
AIN4+
AIN4-
VA-
A0/GUARD
A1
OSC1
OSC2
DGND
OCT ‘08
DS289F5
Copyright © Cirrus Logic, Inc. 2008
http://www.cirrus.com
(All Rights Reserved)