CS4912
Multi-Function Digital Audio Processor
Features
Description
The CS4912 is a highly integrated and cost effective au-
dio processing system for a variety of applications. This
device integrates a 24-bit DSP with on-chip program and
data RAM, a stereo DAC, a full-duplex serial audio inter-
face, a digital audio transmitter, an asynchronous audio
input port, a serial control port, and a phase-locked loop
clock generator. The CS4912 may be coupled with an
ADC such as the CS5331 for 2-in / 2-out audio applica-
tions. A 2-in / 4-out system would include the CS4912
and a stereo CODEC (CS4222), and a 4-in / 6-out sys-
tem can be built using the CS4912 with two CODECs
and a small amount of external logic.
l 24-bit DSP with On-chip Program RAM, Data
RAM, and Stereo DAC
l 24x24 Multiplier with 48-bit Accumulator
l CD Quality Stereo DAC with Output Filter
2 ®
l I C or SPI Serial Control Port
l Integrated S/PDIF Digital Transmitter Port
l Serial Audio Port, up to 4 In/6 Out
l Asynchronous Audio Input Port
l Programmable Phase Locked Loop
l +5 Volt Only CMOS, 44-pin PLCC
The CS4912 is configured for specific applications by
DSP code loaded into the on-chip RAM. The device can
be initialized by an external microcontroller, or booted di-
rectly from a serial EEPROM using a small amount of
external logic. The CRD4912 board is an evaluation plat-
form for the CS4912, with complete documentation to
simplify the design process. CS4912 application firm-
ware kits are available for Car Audio Processing, Dolby
Pro Logic Decoding, and Reverb/Effects applications.
Ordering information for the application firmware kits is
included in the CRD4912 data sheet.
Crystal DSP Application Firmware Kits
l Car Audio Processing for Head or Amp Units
— Crossover Filters, Parametric or Graphic EQs
— Compressor, Peak Limiter, Noise Gate
— 4-channel Adjustable Time Delay
®
l Dolby Surround Pro Logic™ Decoder
— Multiple Output Configurations
— 3D Virtual Surround for 2 Speaker Playback
l Musical Instrument Reverb/Effects
ORDERING INFORMATION
CS4912-CL
44-pin PLCC
CRD4912-01
Reference Design Kit
SCK/SCL
SDA/CDOUT CDIN CS REQ
2
AUXLR
SERIAL CONTROL PORT (SPI OR I C)
AUXILIARY
AUDIO
AUXIN
AUXOUT
AUXCLK
AOUTM
AOUTL
AOUTR
PORT
STEREO DAC
ASYNC
AUDIO
PORT
FSYNC
SCLK
DSP
S/PDIF
TX
SDATA
TRANSMITTER
RESET
BOOT
PIO
XF1
XF2
XF3
XF4
PROG.
I/O PINS
PLL
+
CLOCK MANAGER
FLT CLKIN CLKOUT
This document contains information for a new product.
Cirrus Logic reserves the right to modify this product without notice.
Preliminary Product Information
Cirrus Logic, Inc.
Copyright Cirrus Logic, Inc. 1998
(All Rights Reserved)
Crystal Semiconductor Products Division
P.O. Box 17847, Austin, Texas 78760
(512) 445 7222 FAX: (512) 445 7581
http://www.crystal.com
DEC ‘98
DS282PP2
1