CS42436
108 dB, 192 kHz 6-In, 6-Out TDM CODEC
FEATURES
GENERAL DESCRIPTION
The CS42436 CODEC provides six multi-bit analog-to-
digital and six multi-bit digital-to-analog delta-sigma
converters. The CODEC is capable of operation with ei-
ther differential or single-ended inputs and outputs, in a
52-pin MQFP package.
Six 24-bit A/D, Six 24-bit D/A Converters
ADC Dynamic Range
–
–
105 dB Differential
102 dB Single-Ended
DAC Dynamic Range
Six fully differential, or single-ended, inputs are avail-
able on stereo ADC1, ADC2, and ADC3. When
operating in Single-ended Mode, an internal MUX be-
fore ADC3 allows selection from up to four single-ended
inputs. Digital volume control is provided for each ADC
channel, with selectable overflow detection.
–
–
108 dB Differential
105 dB Single-Ended
ADC/DAC THD+N
–
–
-98 dB Differential
-95 dB Single-Ended
All six DAC channels provide digital volume control and
can operate with differential or single-ended outputs.
Compatible with Industry-Standard Time
An auxiliary serial input is available for an additional two
channels of PCM data.
Division Multiplexed (TDM) Serial Interface
DAC Sampling Rates up to 192 kHz
ADC Sampling Rates up to 96 kHz
The CS42436 is available in a 52-pin MQFP package in
Commercial (-10° to +70°) and Automotive (-40° to
+105°) grades. The CDB42436 Customer Demonstra-
tion board is also available for device evaluation and
implementation suggestions. Please refer to “Ordering
Information” on page 61 for complete ordering
information.
Programmable ADC High-Pass Filter for DC
Offset Calibration
Logarithmic Digital Volume Control
Hardware Mode or Software I²C® & SPI™
The CS42436 is ideal for audio systems requiring wide
dynamic range, negligible distortion and low noise, such
as A/V receivers, DVD receivers, and automotive audio
systems.
Supports Logic Levels Between 5 V and 1.8 V
Control Port & Serial
Audio Port Supply =
1.8 V to 5 V
Digital Supply =
3.3 V
Analog Supply =
3.3 V to 5 V
Hardware Mode or
I2C/SPI Software Mode
Control Data
Internal Voltage
Reference
Register
Configuration
Reset
Differential or
Single-Ended
Outputs
Multibit
DAC1-3 and
Analog Filters
6
6
TDM Serial Audio
Input
Volume
Controls
Digital
Filters
ΔΣ
Modulators
Auxilliary Serial
Audio Input
Multibit
Oversampling
ADC1&2
High Pass
Filter
Digital
Filters
4
Input Master
Clock
Differential or
Single-Ended
Analog Inputs
4
Multibit
Oversampling
ADC3
High Pass
Filter
TDM Serial Audio
Output
Digital
Filters
2
2
*Optional MUX allows selection from up to 4 single-ended inputs.
Copyright © Cirrus Logic, Inc. 2006
AUGUST '06
DS647F1
(All Rights Reserved)
http://www.cirrus.com