5秒后页面跳转
MHF+28512TF PDF预览

MHF+28512TF

更新时间: 2024-01-23 21:22:44
品牌 Logo 应用领域
CRANE 转换器
页数 文件大小 规格书
20页 432K
描述
MHF+ Single, Dual and Triple DC/DC Converters

MHF+28512TF 技术参数

生命周期:Contact Manufacturer包装说明:DIP, DIP20,.8TB
Reach Compliance Code:compliantECCN代码:EAR99
风险等级:5.54其他特性:PLUS OR MINUS12 V ADDITIONAL OUTPUTS AVAILABLE
模拟集成电路 - 其他类型:DC-DC REGULATED POWER SUPPLY MODULE最大输入电压:48 V
最小输入电压:16 V标称输入电压:28 V
JESD-30 代码:R-XDMA-P9JESD-609代码:e4
功能数量:1输出次数:3
端子数量:9最高工作温度:125 °C
最低工作温度:-55 °C最大输出电流:2.12 A
最大输出电压:5.15 V最小输出电压:4.85 V
标称输出电压:5 V封装主体材料:UNSPECIFIED
封装代码:DIP封装等效代码:DIP20,.8TB
封装形状:RECTANGULAR封装形式:MICROELECTRONIC ASSEMBLY
认证状态:Not Qualified座面最大高度:8.38 mm
子类别:Other Analog ICs表面贴装:NO
技术:HYBRID温度等级:MILITARY
端子面层:GOLD端子形式:PIN/PEG
端子节距:2.54 mm端子位置:DUAL
最大总功率输出:7.5 W微调/可调输出:NO
Base Number Matches:1

MHF+28512TF 数据手册

 浏览型号MHF+28512TF的Datasheet PDF文件第2页浏览型号MHF+28512TF的Datasheet PDF文件第3页浏览型号MHF+28512TF的Datasheet PDF文件第4页浏览型号MHF+28512TF的Datasheet PDF文件第5页浏览型号MHF+28512TF的Datasheet PDF文件第6页浏览型号MHF+28512TF的Datasheet PDF文件第7页 
Crane Aerospace & Electronics Power Solutions  
MHF+ Single, Dual and Triple DC/DC Converters  
28 VOLT INPUT – 15 WATT  
FEATURES  
• –55° to +125°C operation  
• 16 to 40 VDC input (16 to 48 VDC triple)  
• Fully isolated  
• Optocoupler feedback  
• Fixed frequency 550 kHz typical  
- 450 kHz triple models  
Topology  
- Single and dual: Single Ended Forward  
- Triple: Current Mode Flyback  
• Transient protection  
MODELS  
- Single and dual: 50 V/50 ms  
- Triple: 80 V/120 ms  
VDC OUTPUT  
SINGLE  
3.3  
5
DUAL  
5
TRIPLE  
+5 & 12  
+5 & 15  
• Inhibit and sync functions  
• Indefinite short circuit protection  
• Undervoltage lockout  
12  
5.2  
12  
15  
3
• Up to 84% efficiency, 28 W/in  
15  
-
Up to 76% efficiency triple models  
28  
MHF+ SERIES™ SINGLE & DUAL  
DC/DC CONVERTERS  
The MHF+ Single and Dual Series™ of high frequency DC/DC  
converters offers a wide input voltage range of 16 to 40 volts and up  
to 15 watts of output power. The units are capable of withstanding  
short term transients up to 50 volts. The package is a hermetically  
sealed, welded metal case. Flanged and non-flanged models are  
available.  
HIGHER POWER DENSITY  
The MHF+ Series offers a new standard of performance for small  
size and high power density. At just 0.33 inch high and a total foot-  
2,  
print of 1.7 in this low profile package offers a total power density  
of up to 28 watts per cubic inch.  
LOW NOISE, HIGH AUDIO REJECTION  
CONVERTER DESIGN  
The MHF+ converters’ feed-forward compensation system provides  
excellent dynamic response and noise rejection. Audio rejection is  
typically 50 dB. Typical output voltage response for a 50% to 100%  
step load transient is as low as 1.3% with a 150 msec recovery time.  
Input ripple current is typically 35 mA p-p with output ripple voltage  
typically 30 mV p-p .  
The MHF+ converters are switching regulators that use a quasi-  
square wave, single-ended forward converter design with a constant  
switching frequency of 550 kHz. Isolation between input and output  
circuits is provided with a transformer in the forward path and a  
temperature compensated optical link in the feedback control loop.  
For the MHF+ dual output models, good cross regulation is main-  
tained by tightly coupled output magnetics. Up to 90% of the total  
output power (80% on 2805D) is available from either output,  
providing the opposite output is simultaneously carrying 10% of the  
total output power (20% on 2805D models). Predictable current limit  
is accomplished by directly monitoring the output load current and  
providing a constant current output above the overload point.  
INHIBIT FUNCTION  
MHF+ converters provide an inhibit terminal that can be used to  
disable internal switching, resulting in no output and very low quies-  
cent input current. The converter is inhibited when a TTL compatible  
low (≤0.8 – output disabled) is applied to the inhibit pin. The unit is  
enabled when the pin, which is internally connected to a pull-up  
resistor, is left unconnected or is connected to an open-collector  
gate. The open circuit output voltage associated with the inhibit pin  
is 8.5 to 12 V. In the inhibit mode, a maximum of 4 mA must be sunk  
from the inhibit pin.  
Crane Aerospace & Electronics  
Page 1 of 20  
Rev K - 20060613  
Electronics Group (Interpoint Brand)  
PO Box 97005 • Redmond WA 98073-9705  
425.882.3100 • electronics@craneae.com  
www.craneae.com  

与MHF+28512TF相关器件

型号 品牌 描述 获取价格 数据表
MHF+28512TF/883 CRANE MHF+ Single, Dual and Triple DC/DC Converters

获取价格

MHF+28512TF/ES CRANE MHF+ Single, Dual and Triple DC/DC Converters

获取价格

MHF+28515T CRANE MHF+ Single, Dual and Triple DC/DC Converters

获取价格

MHF+28515T/883 CRANE MHF+ Single, Dual and Triple DC/DC Converters

获取价格

MHF+28515T/ES CRANE MHF+ Single, Dual and Triple DC/DC Converters

获取价格

MHF+28515TF CRANE MHF+ Single, Dual and Triple DC/DC Converters

获取价格