CRA04P
Vishay
Thick Film, Resistor Array
FEATURES
• Concave terminal array with square corners
• Wide ohmic range: 1R0 to 1M0
• 8 terminal package with isolated resistors
• Lead (Pb)-free solder contacts on NI barrier layer
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
The CRA04P thick film resistor array is constructed on a high
grade ceramic body with concave terminations. A small
package enables the design of high density circuits. The
single component reduces board space, component counts
and assembly costs.
• Compatible with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING LIMITING ELEMENT
TEMPERATURE
COEFFICIENT
ppm/K
RESISTANCE
RANGE
Ω
TOLERANCE
%
MODEL CIRCUIT
P70 °C
VOLTAGE MAX
E-SERIES
W
V≅
100
200
2
5
10R - 1M0
1R0 - 1M0
24
24
0.063
50
CRA04P
03
Zero-Ohm-Resistor: Rmax = 50 mΩ, Imax = 1 A
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CRA04P
Rated Dissipation at 70 °C2)
Limiting Element Voltage1)
Insulation Voltage (1 min)
Category Temperature Range
Insulation Resistance
W per element
0.063
V≅
Vdc/ac peak
°C
50
100
- 55/+ 125 (+ 155)
> 109
Ω
Notes
1. Rated voltage: P × R
2. The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
PART NUMBER AND PRODUCT DESPRIPTION
PART NUMBER: CRA04P08347K0JTD1)
C
R
A
0
4
P
0
8
3
4
7
K
0
J
T
D
MODEL
TERMINAL STYLE
PIN
CIRCUIT
VALUE
TOLERANCE
PACKAGING2)
SPECIAL
CRA04
P
08
3 = 03
R = Decimal
K = Thousand
M = Million
G = 2 ꢀ
J = 5 ꢀ
Z = 0 Ω Jumper
TD
TC
PZ
up to 2 digits
0000 = 0 Ω Jumper
PRODUCT DESCRIPTION: CRA04P 08 03 473
J
RT7 e3
473
CRA04P
08
TERMINAL COUNT CIRCUIT TYPE
08 03
03
J
RT7
e3
MODEL
CRA04P
RESISTANCE VALUE
TOLERANCE
PACKAGING2)
LEAD (Pb)-FREE
473 = 47 kΩ
4R7 = 4.7 Ω
G = 2 ꢀ
J = 5 ꢀ
Z = 0 Ω Jumper
RT7
RT6
PZ
e3 = Pure Tin
Termination Finish
100 = 10 Ω
000 = 0 Ω Jumper
First two digits (3 for 1 ꢀ)
are significant. Last digit
is the multiplier.
Notes
1. Preferred way for ordering products is by use of the PART NUMBER.
2. Please refer to the table PACKAGING, see next page.
Document Number: 31048
Revision: 09-Jan-07
For Technical Questions contact: ff3fresistors@vishay.com
www.vishay.com
1