cPCI-3510(BL) Series
3U CompactPCI 4th/5th Generation Intel® Core™ i7 Processor Blade with ECC
Features
Quad-core 4th/5th Generation Intel® Core™ i7 processor
●
●
Up to 8GB DDR3L ECC soldered memory onboard (up to16GB
for cPCI-3510BL)
●
Up to three independent displays
●
System/Peripheral slot operation
Intel® AMT 9.0 support
●
R
CompactPCI
cPCI-3510(BL) cPCI-3510(BL)D cPCI-3510(BL)G cPCI-3510L cPCI-3510M cPCI-3510T
Specifications
● Processor & System
● Connectivity
CPU
PMC/XMC
Quad-core Intel® Core™ i7-5700EQ Processor 2.6GHz (Turbo boost up to
3.4GHz), 6M Cache, 47/37W by cTDP (cPCI-3510BL only)
Optional PCI 64-bit/66MHz PMC site or PCIe x1 XMC site
New
Quad-core Intel® Core™ i7-4700EQ Processor 2.4GHz (Turbo boost up to
3.4GHz), 6M Cache, 47/37W by cTDP
Dual-core Intel® Core™ i5-4402E Processor 1.6GHz (Turbo boost up to
2.7GHz), 3M Cache, 25W
Supports Intel® Hyper-Threading and Turbo Boost Technology, VT-x, VT-D,
vPro Technology
Ethernet
One Intel® I217LM controller for one Gigabit Ethernet front panel port with
Intel® AMT 9.0 support
Three Intel® I210 controllers for one Gigabit Ethernet front panel port and
two rear ports
Additional two Intel® 82574L controllers for two Gigabit
Ethernet front panel ports on riser card (cPCI-3510L/cPCI-3510T)
Chipset
Intel® QM87 Chipset
Graphics
Integrated in Intel® processor, 3D engine
Memory
One DVI-I (digital+analog) port on front panel, analog
switchable to rear, supports up to QXGA 2048x1536 pixels@75Hz, 32-bits
DDR3L-1333 SDRAM ECC soldered, up to 16GB (cPCI-3510BL)
DDR3L-1600 SDRAM ECC soldered, up to 8GB (cPCI-3510)
Two DisplayPorts on riser card, support up to 2560×1440
pixels @ 60Hz, DVI, VGA and HDMI interfaces are available by adapter cables
(cPCI-3510(BL)G only)
BIOS
AMI EFI BIOS, 64Mbit SPI Flash memory
Three independent displays with different /contents
CompactPCI Bus
PCI 32-bit, 33/66 MHz, 3.3V or 5V universal V (I/O)
USB
Single USB 3.0 port on front panel, and up to three USB
ports on front panel on selected SKUs
Supports operation in system slot as master or in
peripheral slot as stand-alone blade without connectivity to CompactPCI®
bus (Satellite mode)
Three USB ports to rear, two on RTM panel
Audio
PICMG Standards
PICMG 2.0 CompactPCI R3.0
Line-in and Line-out ports on front panel (cPCI-3510(BL)D only)
PICMG 2.1 Hot Swap R2.0
PS/2
PICMG 2.9 System Management (R1.0)
Keyboard/Mouse on cPCI-3510(BL)D and cPCI-3510(BL)G
Serial Port
Up to four serial ports
One RS-232/422/485 selectable port on front panel (cPCI-3510(BL)D/
cPCI-3510L/cPCI-3510T)
One RS-232/422/485 10-pin header on riser card (cPCI-3510(BL) G only)
Two serial ports on rear panel: one with Tx/Rx signal only, one converted
from USB signal