CPC1909J
60V, 15A, Single-Pole
Normally Open Power Relay
INTEGRATED
C
IRCUITS
D
IVISION
Characteristics
Description
IXYS Integrated Circuits brings OptoMOS®
technology, reliability and compact size to a new family
of high-power Solid State Relays.
Parameter
Rating
Units
VP
Blocking Voltage
60
Load Current, TA=25°C:
As part of this family, the CPC1909J single-pole
normally open (1-Form-A) Solid State Power Relay is
With 5°C/W Heat Sink
No Heat Sink
15
6.5
0.1
Arms / A
DC
rated for up to 15A
continuous load current with a
rms
On-Resistance (max)
Thermal Impedance,
5°C/W heat sink.
The CPC1909J employs optically coupled MOSFET
technology to provide 2500V of input to output
Junction-to-case,
0.3
°C/W
JC
rms
isolation. The optically coupled outputs, that use
patented OptoMOS architecture, are controlled by a
highly efficient infrared LED. The combination of low
on-resistance and high load current handling
capability makes this relay suitable for a variety of high
performance switching applications.
Features
• 15A
Load Current with 5°C/W Heat Sink
rms
• Low 0.1 On-Resistance
• 60V Blocking Voltage
P
• 2500V
Input/Output Isolation
rms
• Low Thermal Impedance: = 0.3 °C/W
• Isolated, Low Thermal Impedance Ceramic Pad for
Heat Sink Applications
• Low Drive Power Requirements
• No EMI/RFI Generation
• Flammability Rating UL 94 V-0
JC
The unique ISOPLUS-264 package pioneered by
IXYS allows Solid State Relays to achieve the highest
load current and power ratings. This package features
a unique IXYS process where the silicon chips are soft
soldered onto the Direct Copper Bond (DCB)
substrate instead of the traditional copper leadframe.
The DCB ceramic, the same substrate used in high
Applications
power modules, not only provides 2500V
isolation
rms
• Industrial Controls / Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
but also very low junction-to-case thermal impedance
(0.3 °C/W).
Ordering Information
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Transportation Equipment
Part
Description
CPC1909J
ISOPLUS-264 Package (25 per tube)
Switching Characteristics
Approvals
• UL 508 Certified Component: File E69938
Form-A
IF
Pin Configuration
90%
10%
t
ILOAD
t
on
off
e
3
DS-CPC1909J-R11
www.ixysic.com
1