August 2003
COP8CBR9/COP8CCR9/COP8CDR9
8-Bit CMOS Flash Microcontroller with 32k Memory,
Virtual EEPROM, 10-Bit A/D and Brownout
tions requiring a full featured, in-system reprogrammable
1.0 General Description
controller with large memory and low EMI. The same device
The COP8CBR/CCR/CDR9 Flash microcontrollers are
is used for development, pre-production and volume produc-
™
highly integrated COP8 Feature core devices, with 32k
tion with a range of COP8 software and hardware develop-
ment tools.
Flash memory and advanced features including Virtual EE-
PROM, A/D, High Speed Timers, USART, and Brownout
Reset. This single-chip CMOS device is suited for applica-
Device included in this datasheet:
Flash Program
RAM
(bytes)
Brownout
Voltage
I/O
Pins
Device
Memory
(bytes)
Packages
Temperature
44 LLP,
37,39,49,
59
COP8CBR9
COP8CCR9
COP8CDR9
32k
32k
32k
1k
1k
1k
2.7V to 2.9V
44/68 PLCC,
48/56 TSSOP
44 LLP,
−40˚C to +85˚C
37,39,49,
59
−40˚C to +85˚C
−40˚C to +125˚C
4.17V to 4.5V
No Brownout
44/68 PLCC,
48/56 TSSOP
44 LLP,
37,39,49,
59
−40˚C to +85˚C
−40˚C to +125˚C
44/68 PLCC,
48/56 TSSOP
n MICROWIRE/PLUS (Serial Peripheral Interface
Compatible)
n Clock Doubler for 20 MHz operation from 10 MHz
Oscillator, with 0.5 µs Instruction Cycle
n Thirteen multi-source vectored interrupts servicing:
— External Interrupt
2.0 Features
KEY FEATURES
n 32 kbytes Flash Program Memory with Security Feature
n Virtual EEPROM using Flash Program Memory
n 1 kbyte volatile RAM
n 10-bit Successive Approximation Analog to Digital
Converter (up to 16 channels)
— USART (2)
— Idle Timer T0
— Three Timers (each with 2 interrupts)
— MICROWIRE/PLUS Serial peripheral interface
— Multi-Input Wake-up
n 100% Precise Analog Emulation
n USART with onchip baud generator
n 2.7V – 5.5V In-System Programmability of Flash
n High endurance -100k Read/Write Cycles
n Superior Data Retention - 100 years
n Dual Clock Operation with HALT/IDLE Power Save
Modes
— Software Trap
n Idle Timer with programmable interrupt interval
n 8-bit Stack Pointer SP (stack in RAM)
n Two 8-bit Register Indirect Data Memory Pointers
n True bit manipulation
n Three 16-bit timers:
n WATCHDOG and Clock Monitor logic
n Software selectable I/O options
— TRI-STATE® Output/High Impedance Input
— Push-Pull Output
— Timers T2 and T3 can operate at high speed (50 ns
resolution)
— Processor Independent PWM mode
— External Event counter mode
— Weak Pull Up Input
— Input Capture mode
n Schmitt trigger inputs on I/O ports
n High Current I/Os
n Brown-out Reset (COP8CBR9/CCR9)
OTHER FEATURES
n Temperature range: –40˚C to +85˚C and –40˚C to
+125˚C (COP8CCR9/CDR9)
n Packaging: 44 and 68 PLCC, 44 LLP, 48 and 56 TSSOP
n True In-System, real time emulation and debug tools
available
n Single supply operation:
— 2.7V–5.5V (−40˚C to +85˚C)
— 4.5V–5.5V (−40˚C to +125˚C)
n Quiet Design (low radiated emissions)
n Multi-Input Wake-up with optional interrupts
™
COP8 is a trademark of National Semiconductor Corporation.
© 2003 National Semiconductor Corporation
DS101374
www.national.com