July 1999
COP888GD
8-Bit CMOS ROM Based Microcontrollers with 16k
Memory and 8-Channel A/D
Family features include an 8-bit memory mapped architec-
ture, 10 MHz CKI with 1µs instruction cycle, three multi-
General Description
The COP888GD ROM based microcontrollers are highly in-
™
function 16-bit timer/counters, MICROWIRE/PLUS serial
™
tegrated COP8 Feature core devices with 16k memory
I/O, one 8-bit/8-channel A/D converter with prescaler and
both differential and single ended modes, two power saving
HALT/IDLE modes, MIWU, idle timer, high current outputs,
and advanced features including an A/D Converter. These
multi-chip CMOS devices are suited for applications requir-
ing a full featured controller with an 8-bit A/D converter, and
as pre-production devices for a masked ROM design. Pin
and software compatible 16k or 32k OTP EPROM versions
are available (COP87L88GD/RD Family) for pre-production,
and for use with a range of COP8 software and hardware de-
velopment tools.
™
software selectable I/O options, WATCHDOG timer and
Clock Monitor, 2.5V to 5.5V operation, program code secu-
rity, and 44 pin package.
Devices included in this datasheet are:
Device
Memory (bytes) RAM (bytes) I/O Pins Packages Temperature
Comments
COP688GD
COP888GD
COP988GD
16k ROM
16k ROM
16k ROM
256
256
256
40
40
40
44 PLCC
44 PLCC
44 PLCC
-55 to +125˚C 4.5V to 5.5V
-40 to +85˚C
0 to +70˚C
2.5V to 5.5V
2.5V to 4.0V, GDH = 4.0V to
6.0V
Key Features
CPU/Instruction Set Features
n 8-channel A/D converter with prescaler and both
differential and single ended modes
n Three 16-bit timers, each with two 16-bit registers
supporting:
n 1 µs instruction cycle time
n Twelve multi-source vectored interrupts servicing
— External Interrupt
— Idle Timer T0
— Processor Independent PWM mode
— External Event counter mode
— Input Capture mode
— Three Timers (each with 2 Interrupts)
— MICROWIRE/PLUS
— Multi-Input Wake Up
— Software Trap
n Quiet design (low radiated emissions)
n 16 kbytes on-board ROM
n 256 bytes on-board RAM
— Default VIS (default interrupt)
n Versatile and easy to use instruction set
n 8-bit Stack Pointer (SP) – stack in RAM
n Two 8-bit Register Indirect Data Memory Pointers (B
and X)
Additional Peripheral Features
n Idle Timer
n Multi-Input Wakeup (MIWU) with optional interrupts (8)
n WATCHDOG and clock monitor logic
n MICROWIRE/PLUS serial I/O
Fully Static CMOS
n Two power saving modes: HALT and IDLE
n Single supply operation: 2.5V to 5.5V
n Temperature range: −0˚C to +70˚C and −40˚C to +85˚C
I/O Features
n Memory mapped I/O
n Software selectable I/O options (TRI-STATE® Output,
Push-Pull Output, Weak Pull Up Input, High Impedance
Input)
n Schmitt trigger inputs on ports G and L
n Package:
Development Support
n Emulation and OTP devices
n Real time emulation and full program debug offered by
MetaLink Development System
— 44 PLCC with 40 I/O pins
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
™
™
™
™
MICROWIRE/PLUS , COP8 , MICROWIRE and WATCHDOG are trademarks of National Semiconductor Corporation.
iceMASTER® is a registered trademark of MetaLink Corporation.
© 1999 National Semiconductor Corporation
DS100076
www.national.com