CM6302
USB High-Quality Dolby® Headphone Solution
FEATURES
DESCRIPTION
USB specification 2.0 full speed-compliant and
The CM6302 is a highly integrated single-chip USB
audio solution. All essential analog and digital
modules are integrated into the chip, including 2-ch
DAC and 2-ch ADC, earphone/speaker driving
capable, DRC (default off), linear microphone gain
control, PLL, regulator and USB transceiver
modules. As for DAC and ADC quality, this single
chip supports 8khz/16Khz/ 44.1Khz/48Khz sampling
rates with 16-bit resolution.
USB IF-certified
Compatible with Win98SE/WinME/Win2000/
WinXP/Vista without additional drivers
USB audio device specification 1.0 and USB HID
specification 1.1-compliant
Supports control/interrupt/isochroous data
transfers
USB suspend/resume and remote wake-up
support
For higher performance, the CM6302 supported I2S
and I2C interfaces communicate with external
codecs or the MCU for further processing. The
CM6302 is the world’s first multi-channel software-
integrated DSP with Xear 3D and Dolby® Digital
sound. This audio solution is highly suitable for
high-end USB headsets, earphone, audio interface
box or proprietary wireless audio applications.
Embedded USB transceiver and power-on reset
circuit
Single 12MHz crystal input with on-chip PLL
Bus-power and self-power mode options
High-power (500mA) and low-power (100mA)
mode options
SCMS-compliant (Serial Copy Management
System)
BLOCK DIAGRAM
www.cmedia.com.tw
Copyright© C-Media Electronics Inc.
Rev. 1.9 ︱ Page 1/40