5秒后页面跳转
CLRC663 PDF预览

CLRC663

更新时间: 2024-09-28 07:16:51
品牌 Logo 应用领域
恩智浦 - NXP /
页数 文件大小 规格书
132页 1940K
描述
Contactless reader IC

CLRC663 数据手册

 浏览型号CLRC663的Datasheet PDF文件第2页浏览型号CLRC663的Datasheet PDF文件第3页浏览型号CLRC663的Datasheet PDF文件第4页浏览型号CLRC663的Datasheet PDF文件第5页浏览型号CLRC663的Datasheet PDF文件第6页浏览型号CLRC663的Datasheet PDF文件第7页 
CLRC663  
Contactless reader IC  
Rev. 3.3 — 3 April 2012  
171133  
Product data sheet  
COMPANY PUBLIC  
1. Introduction  
This document describes the functionality and electrical specifications of the contactless  
reader/writer IC CLRC663.  
2. General description  
The CLRC663 is a highly integrated transceiver IC for contactless communication at  
13.56 MHz.  
The CLRC663 transceiver IC supports the following operating modes  
Read/write mode supporting ISO/IEC 14443A/MIFARE  
Read/write mode supporting ISO/IEC 14443B  
Read/write mode supporting JIS X 6319-4 (comparable with FeliCa1 (see  
Section 21.5) scheme)  
Passive initiator mode according to ISO/IEC 18092  
Read/write mode supporting ISO/IEC 15693  
Read/write mode supporting ICODE EPC UID/ EPC OTP  
Read/write mode supporting ISO/IEC 18000-3 mode 3/ EPC Class-1 HF  
The CLRC663’s internal transmitter is able to drive a reader/writer antenna designed to  
communicate with ISO/IEC 14443A/MIFARE cards and transponders without additional  
active circuitry. The digital module manages the complete ISO/IEC 14443A framing and  
error detection functionality (parity and CRC).  
The CLRC663 supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight,  
MIFARE Ultralight C, MIFARE PLUS and MIFARE DESFire products. The CLRC663  
supports MIFARE higher transfer speeds of up to 848 kbit/s in both directions.  
The CLRC663 supports layer 2 and 3 of the ISO/IEC 14443B reader/writer  
communication scheme except anticollision. The anticollision needs to be implemented in  
the firmware of the host controller as well as in the upper layers.  
The CLRC663 is able to demodulate and decode FeliCa coded signals.The FeliCa  
receiver part provides the demodulation and decoding circuitry for FeliCa coded signals.  
The CLRC663 handles the FeliCa framing and error detection such as CRC. The  
CLRC663 supports FeliCa higher transfer speeds of up to 424 kbit/s in both directions.  
1. In the following the word FeliCa is used for JIS X 6319-4  

与CLRC663相关器件

型号 品牌 获取价格 描述 数据表
CLRC66301HN NXP

获取价格

Contactless reader IC
CLRC66301HN,151 NXP

获取价格

Contactless reader IC, SOT617-1 Package, Standard Marking, Tray Pack, Bakeable, Single
CLRC66301HN,157 NXP

获取价格

Contactless reader IC, SOT617-1 Package, Standard Marking, Tray Pack, Bakeable, Multiple
CLRC66301HN,551 NXP

获取价格

Contactless reader IC, SOT617-1 Package, Standard Marking, Tray Dry Pack, Bakeable, Single
CLRC66301HN/TRAYM NXP

获取价格

IC SPECIALTY TELECOM CIRCUIT, Telecom IC:Other
CLRC66301HN1/TRAYBM NXP

获取价格

SPECIALTY TELECOM CIRCUIT, PQCC32, 5 X 5 MM, 0.85 MM HEIGHT, PLASTIC, MO-220, SOT617-1, HV
CLRC66302HN,118 NXP

获取价格

CLRC66302HN - High-performance multi-protocol NFC frontend QFN 32-Pin
CLRC66302HN,157 NXP

获取价格

CLRC66302HN - High-performance multi-protocol NFC frontend QFN 32-Pin
CLRC66302HN/T/R NXP

获取价格

IC SPECIALTY TELECOM CIRCUIT, Telecom IC:Other
CLRC66302HN/TRAYB NXP

获取价格

IC SPECIALTY TELECOM CIRCUIT, Telecom IC:Other