Datasheet > CHS-6

CHS-6

更新时间： 2024-09-23 06:47:43

品牌	Logo	应用领域
GAMEWELL-FCI		监视器
页数	文件大小	规格书
2页	180K
描述
Ten-Input Monitor Module

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

CHS-6 数据手册

Features

PIM-SS

• Ten addressable Class B or

five addressable Class A

initiating device circuits.

Ten-Input Monitor Module

• Removable 12 AWG (3.25

mm²) to 18 AWG (0.9 mm²)

plug-in terminal blocks.

Description

Gamewell’s SmartScan^TMPIM-SS ten-

• Use with Gamewell’s IF602,

610, 632, 654 and 658 with

SmartScan™ loop card.

input monitor module provides an

interface between a control panel

and normally open contact devices

in intelligent alarm systems such as

conventional pull stations and heat

detectors.

• Status indicators for each

point.

• Unused addresses may be

disabled.

The first address on the PIM-SS is

set from 01 to 90 and the remaining

modules are automatically assigned

to the next nine higher addresses.

Provisions are included for disabling

a maximum of two unused ad-

dresses.

• Rotary address switches.

• Class A or Class B operation.

• Mount one or two modules in a

BB-XP cabinet (optional).

• Mount up to six modules on a

CHS-6 chassis in a BB-25

cabinet (optional).

SS-M with SS-B6 base

The supervised state (normal, open,

or short) of the monitored device is

• Mounting hardware included.

sent back to the panel. A common SLC input is used for all modules, and the

initiating device loops share a common supervisory supply and ground — other-

wise each monitor operates independently from the others.

Each PIM-SS module has panel-controlled green LED indicators. The panel can

cause the LEDs to blink, latch on, or latch off.

Listings

Listings and approvals below

apply to the PIM-SS Ten-Input

Monitor Module. In some

cases, certain modules may

not be listed by certain ap-

proval agencies, or listing may

be in process. Consult factory

for latest listing status.

Product Line Information

PIM-SS: Ten-input monitor module.

BB-25: Optional cabinet for up to six modules mounted on CHS-6 chassis (be-

low). Dimensions, DOOR: 24.0" (60.96 cm) wide x 12.632" (32.0852 cm) high, x

1.25" (3.175 cm) deep, hinged at bottom; BACKBOX: 24.0" (60.96 cm) wide x

12.550" (31.877 cm) high x 5.218" (13.2537 cm) deep.

• UL Listed: file S521.

• CSFM approved:

file 7300-1288:169.

CHS-6: Chassis, mounts up to six modules in a BB-25 cabinet.

• MEA approved:

file 368-01-E Vol. II.

PIM-SS CS-2468 09/01/06

Page 1 of 2

中文翻译

下载PDF

与CHS-6相关器件

型号	品牌	获取价格	描述	数据表
CHS604805	COSEL	获取价格	DC-DC Regulated Power Supply Module, 1 Output, 60W, Hybrid, DIP-8
CHS604812	COSEL	获取价格	DC-DC Regulated Power Supply Module, 1 Output, 72W, Hybrid, DIP-8
CHS60483R3	COSEL	获取价格	DC DC CONVERTER 3.3V
CHS663S21P	ETC	获取价格	LIGHT-DEPENDENT-RESISTOR-OUTPUT OPTOCOUPLER
CHS664S22P	ETC	获取价格	LIGHT-DEPENDENT-RESISTOR-OUTPUT OPTOCOUPLER
CHS667S21P	ETC	获取价格	LIGHT-DEPENDENT-RESISTOR-OUTPUT OPTOCOUPLER
CHS668S21P	ETC	获取价格	LIGHT-DEPENDENT-RESISTOR-OUTPUT OPTOCOUPLER
CHS66G22PF	ETC	获取价格	Optoelectronic
CHS70ANE11P	ETC	获取价格	LIGHT-DEPENDENT-RESISTOR-OUTPUT OPTOCOUPLER
CHS70BGE11P	ETC	获取价格	LIGHT-DEPENDENT-RESISTOR-OUTPUT OPTOCOUPLER