U06P20PT
THRU
CHENMKO ENTERPRISE CO.,LTD
SUPER FAST RECOVERY RECTIFIER
U06P40PT
VOLTAGE RANGE 200 - 400 Volts CURRENT 6 Amperes
FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* Dual rectifier construction, positive centertap
* Glass passivated chip junctions
* Low power loss
* Low forward voltage, high current capability
* High surge current capability
DPAK
* Superfast recovery times for high efficiency
* High temperature soldering guaranteed :
260oC/10 seconds at terminals
.094 (2.40)
.086 (2.20)
.022 (0.55)
.017 (0.45)
MECHANICAL DATA
Case: JEDEC DPAK molded plastic
Terminals: Lead solderable per MIL-STD-750,
Method 2026
Polarity: As marked
Weight: 1.7 grams ( Approximately )
.027 (0.70)
.019 (0.50)
.035 (0.90)
.023 (0.60)
.181 (4.60)
.263 (6.70)
.248 (6.30)
.015 (0.381)
PIN 1
PIN 2
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
K - HEATSINK
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
DPAK
MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted )
U06P30PT
300
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
SYMBOL
VRRM
U06P20PT
200
U06P40PT
400
UNITS
Volts
Volts
Volts
VRMS
140
210
280
Maximum DC Blocking Voltage
VDC
200
300
400
Maximum Average Forward Rectified Current
IO
IFSM
CJ
6.0
Amps
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
100
Typical Junction capacitance per leg ( NOTE 1 )
Typical thermal resistance ( NOTE 2 )
30
5.0
pF
oC / W
oC
R
JC
Operating and Storage Temperature Range
TJ, TSTG
-55 to +150
ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted )
U06P30PT
UNITS
Volts
CHARACTERISTICS
SYMBOL
U06P20PT
0.975
U06P40PT
Maximum Instantaneous Forward Voltage at 3.0 A DC
VF
1.30
TC = 25oC
TC = 100oC
5.0
150
35
Maximum DC reverse current
IR
uAmps
at rated DC blocking voltage per leg
Maximum reverse recovery time ( NOTE 3 ) per leg
nS
trr
2002-5
NOTES : 1. Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
2. Thermal resistance from junction to case per leg mounted on heatsink
3. Reverse recovery test conditions : IF = 0.5 A, Ir = -1.0 A, Irr = -0.25 A.