HIGH STABILITY CRYSTAL OSCILLATORS
SERIES CX8000
FEATURES
WIDE FREQUENCY RANGE
STABILITY TO ±5 PPM
CUSTOM SPECIFICATIONS
SPECIFICATIONS
FREQUENCY RANGE
1.00 MHz TO 100.00 MHz
FREQUENCY STABILITY OVER TEMPERATURE ±5 PPM TO ±50 PPM MAX AT VCC = +5.0 VDC AND STANDARD LOAD
RANGE (REFERENCED TO25°C)
(SEE TABLE 1 FOR STABILITY OVER TEMPERATURE RANGE)
0°C TO +50°C (NARROW)
0°C TO +70°C (STANDARD)
-40°C TO +85°C (EXTENDED)
AT VCC = +5.0 VDC AND STANDARD LOAD
OPERATING TEMPERATURE RANGE
STORAGE TEMPERATURE RANGE
AGING CHARACTERISTICS
-40°C TO +85°C
±4 PPM MAX FOR THE FIRST YEAR
±2 PPM MAX PER YEAR THEREAFTER
OUTPUT WAVEFORM OPTIONS
SYMMETRY
TTL, HCMOS, OR ACMOS (SEE TABLE 2)
NORMAL: 40/60 % TIGHT: 45/55 %
FREQUENCY STABILITY OVER
LOAD VARIATION
±3 PPM MAX FOR 10% VARIATION AT VCC = +5.0 VDC AT 25°C
+5.0 VDC ±5% (3.3 VDC AVAILABLE)
SUPPLY VOLTAGE
FREQUENCY STABILITY OVER
SUPPLY VOLTAGE VARIATION
±5 PPM MAX FOR 5% VARIATION AT VCC = +5.0 VDC
AND STANDARD LOAD AT 25°C
SUPPLY CURRENT
35 mA MAX AT VCC = +5.0 VDC AND STANDARD LOAD AT 25°C
-0.5 TO +7.0 VDC FOR VCC AND VC (N0N DESTRUCTIVE)
ABSOLUTE VOLTAGE RANGE
CONTROL PIN 2: HIGH OR OPEN (+2.0 VDC MIN) OUTPUT PIN 4: ENABLED
CONTROL PIN 2: LOW OR GND (+0.8 VDC MAX) OUTPUT PIN 4: DISABLED (HIGH Z)
ENABLE/DISABLE FUNCTION
STORAGE TEMPERATURE RANGE
PHASE NOISE (TYPICAL)
-40°C TO +85°C
SEE GRAPH FOR PHASE NOISE CHARACTERISTICS
OUTPUT AND LOAD CHARACTERISTICS
TEMPERATURE RANGE DESIGNATIONS
TABLE 1
TABLE 2
TTL/HCMOS COMPATIBLE
SYMMETRY: 40/60% TO 60/40% AT +1.4 VDC
VOH: +2.4 VDC MIN
VOL: +0.4 VDC MAX
TEMPERATURE TEMPERATURE
CODE
RANGE
STABILITY
± 5 PPM
TTL - 10 TTL LOADS
HCMOS - 15 pF MAX
ACMOS - 15 pF MAX
A
B
C
D
E
F
G
H
I
0°C TO +50°C
0°C TO +50°C
0°C TO +50°C
0°C TO +50°C
0°C TO +50°C
0°C TO +70°C
0°C TO +70°C
0°C TO +70°C
0°C TO +70°C
0°C TO +70°C
0°C TO +70°C
-40°C TO +85°C
-40°C TO +85°C
-40°C TO +85°C
-40°C TO +85°C
-40°C TO +85°C
RISE/FALL TIME: 10 ns WITH STANDARD LOAD (20% TO 80%)
± 10 PPM
± 15 PPM
± 20 PPM
± 25 PPM
± 10 PPM
± 15 PPM
± 20 PPM
± 25 PPM
± 35 PPM
± 50 PPM
± 20 PPM
± 25 PPM
± 30 PPM
± 35 PPM
± 50 PPM
TTL/HCMOS COMPATIBLE
SYMMETRY: 40/60% TO 60/40% AT 50% LEVEL
VOH: +4.5 VDC MIN
VOL: +0.5 VDC MAX
RISE/FALL TIME: 5 ns WITH STANDARD LOAD (20% TO 80%)
ACMOS TO DRIVE 3 GATES AT TTL LEVELS
SYMMETRY: 40/60% TO 60/40% AT 50% LEVEL
VOH: +4.5 VDC MIN
VOL: +0.5 VDC MAX
RISE/FALL TIME: 5 ns WITH 30 pF LOAD (20% TO 80%)
J
MECHANICAL CHARACTERISTICS
K
L
MECHANICAL SHOCK
THERMAL SHOCK
RANDOM VIBRATION
GROSS LEAK
MIL-STD-202, METHID 213, CONDITION E
M
O
P
Q
MIL-STD-883, METHOD 1011, CONDITION A
MIL-STD-883, METHOD 2007, CONDITION A
100% LEAK TESTED IN DEIONIZED WATER
LEAK RATE LESS THAN 0.05 PPM ATM x cc/s OF HELIUM
240° C ±5 s MAXIMUM FOR 10 s
HERMETIC SEAL
SOLDERING CONDITIONS
MECHANICAL
SURFACE MOUNT, 6 PIN PER OUTLINE DRAWING
Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A.
Tel: 305-593-6033 Fax: 305-594-3973 e-mail: sales@raltron.com Internet: http://www.raltron.com