CE02-2A Series
Moistureproof Receptacle Type Conforming to MIL-C-5015
DDK's CE02-2A series provides a set of vibration-
resistant, moistureproof, and oilproof receptacle
connectors. This series uses synthetic rubber for
-
its front inserts to cope with the various environ
ments in which industrial machines are installed.
The products in the CE02-2A series are compatible
with those in the DMS series and comply to MIL-C-
5015. They prevent the entry of water moisture,
cutting oil, and other foreign matter into machines
where these connectors are employed, helping
enhance the reliability of the machines. Typically,
their best applications are in servo motors, machine
tools, and equipment relating to factory automation
as well as in extremely dusty environments. For plug
-
connectors to mate with these receptacle connec
tors, DDK recommends that you use the CE02-6A
series or the DMS (D190) series available from DDK.
FEATURE
●The products in the CE02-2A series are interchangeable with those in the DMS series, because both
are indentical in installation dimensions.
●The inserts are of a three-piece design. Their contacts will not break when used under normal operating
conditions.
●The inserts, which are made of silicone rubber, may be used at temperature of up to 125℃
●Coupling a receptacle connector in the CE02-2A series with a plug connector in the CE02-6A series or
the DMS (D190) series allows the entire joint between the two connectors to be moistureproof.
MATERIAL/FINISH
Shell
Aluminum alloy/Zinc plating, Olive drab chromate finish
Silicone rubber
Front insert
Middle insert PPS resin
Rear insert
Contact
PPS resin
Copper alloy/Silver plating
Flange gasket Silicone rubber
●ꢀ1 ●
<BACK NEXT>
MENU