CS42448
108 dB, 192 kHz 6-in, 8-out CODEC
FEATURES
GENERAL DESCRIPTION
The CS42448 CODEC provides six multi-bit analog-to-digi-
tal and eight multi-bit digital-to-analog Delta-sigma
converters. The CODEC is capable of operation with either
differential or single-ended inputs and outputs, in a 64-pin
LQFP package.
z Six 24-bit A/D, Eight 24-bit D/A Converters
z ADC Dynamic Range
– 105 dB Differential
– 102 dB Single-ended
z DAC Dynamic Range
Six fully differential, or single-ended, inputs are available on
stereo ADC1, ADC2, and ADC3. When operating in Single-
ended Mode, an internal MUX before ADC3 allows selec-
tion from up to four single-ended inputs. Digital volume
control is provided for each ADC channel, with selectable
overflow detection.
– 108 dB Differential
– 105 dB Single-ended
z ADC/DAC THD+N
– -98 dB Differential
All eight DAC channels provide digital volume control and
can operate with differential or single-ended outputs.
– -95 dB Single-ended
z Compatible with Industry-standard Time
Division Multiplexed (TDM) Serial Interface
z System Sampling Rates up to 192 kHz
z Programmable ADC High-pass Filter for DC
Offset Calibration
An auxiliary serial input is available for an additional two
channels of PCM data.
The CS42448 is ideal for audio systems requiring wide dy-
namic range, negligible distortion and low noise, such as
A/V receivers, DVD receivers, and automotive audio
systems.
z Logarithmic Digital Volume Control
z I²C & SPI™ Host Control Port
z Supports Logic Levels Between 5 V and
1.8 V
ORDERING INFORMATION
®
See page 67.
z Popguard Technology
Control Port & Serial
Audio Port Supply =
1.8 V to 5 V
Digital Supply =
3.3 V to 5 V
Analog Supply =
3.3 V to 5 V
I2C/SPI
Software Mode
Control Data
Register
Configuration
Internal Voltage
Reference
External
Mute Control
Mute
Control
ADC Overflow
& Clock Error
Interrupt
Interrupt
Reset
Differential or
Single-Ended
Outputs
Multibit
DAC1-4 and
Analog Filters
Serial Audio
Input
8
8
Volume
Controls
Digital
Filters
∆Σ
Modulators
Auxilliary Serial
Audio Input
Multibit
Oversampling
ADC1&2
High Pass
Filter
Digital
Filters
4
4
Input Master
Clock
Differential or
Single-Ended
Analog Inputs
Multibit
Oversampling
ADC3
High Pass
Filter
Serial Audio
Output
Digital
Filters
2
2
*Optional MUX allows selection from up to 4 single-ended inputs.
This document contains information for a new product.
Cirrus Logic reserves the right to modify this product without notice.
Preliminary Product Information
Cirrus Logic, Inc.
http://www.cirrus.com
Copyright © Cirrus Logic, Inc. 2005
FEB ‘05
DS648PP2
(All Rights Reserved)