Series CCT-39S
Multi-Throw DC-10 GHz, SP9T & SP10T
Latching Coaxial Switch, Internal 50Ω Termination
COAX SWITCHES
PART NUMBER DESCRIPTION
CCT-39S Commercial Latching Multi-throw, DC-10GHz
The CCT-39S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a
microwave signal from a common input to any of 9 or 10 outputs. The characteristic impedance is 50
Ohms. Each position has an individual actuator mechanism allowing random position selection. This also
minimizes switching time.
The CCT-39S comes with a latching actuator. The latching switch remains in the last position selected
when the switch is de-energized. STD dual command requires a reset pulse before a new selected
position. A separate reset circuit allows all positions to be set to an open position. User must provide both
reset (clear) and set (select new position) commands.
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
Operating Temperature
Form Factor
Multi-Throw,
Commercial Model, CCT-39S
–40°C to 65°C
10 g’s RMS
break before make
Vibration (MIL-STD-202 Method 214,
Condition D, non-operating)
Frequency Range
CCT-39S
DC–10 GHz
Shock (MIL-STD-202 Method 213,
Condition D, non-operating)
500 g’s
Characteristic Impedance
Operate Time
50 Ohms
20 ms (max.)
12 15 24 28
Standard Actuator Life
Actuator Life w/ Additional Features
3,000,000 cycles
1,000,000 cycles
Actuation Voltage Available
Actuation Current
V
110 105 90 105 mA
Connector Type
Humidity (Moisture Seal)
Weight
SMA
Reset Current (# of Positions)
Available
(9) 990 945 810 945 mA
(10) 1100 1050 900 1050 mA
9 oz. (255.2g) (max.)
PERFORMANCE CHARACTERISTICS
Frequency
DC–2.3 GHz
2.3-3.0 GHz
3.0-6.0 GHz
6.0-8.0 GHz
8.0-10.0 GHz
Insertion Loss, dB,
max.
0.2
0.25
0.30
0.40
0.6
Isolation, dB, min.
VSWR , max.
80
70
65
60
60
1.15:1
1.20:1
1.30:1
1.40:1
1.60:1
PART NUMBERING SYSTEM
CCT-39
S
6
0
C
-
T **
Series
Options
Connectors
Actuator Voltage
Actuator Type
Number of Positions
OPTIONS
CONNECTOR
ACTUATOR VOLTAGE
NUMBER OF POSITIONS
9: SP9T
ACTUATOR TYPE
S: SMA FEMALE
6: 28 VDC LATCHING
7: 15 VDC LATCHING
8: 12 VDC LATCHING
9: 24 VDC LATCHING
0: NO INDICATOR CONTACTS
C: INDICATOR CONTACTS
T: TTL DRIVERS WITH DIODES
D: COIL TRANSIENT SUPPRESSION DIODES
R: POSITIVE + COMMON
0: SP10T
TD: DECODERS AND TTL DRIVERS WITH
DIODES
**
SEE PART NUMBER ON PAGE 10
M: MOISTURE SEAL
S: D-SUB CONNECTOR*
* D-Sub Connector may be 15 or 26 pin depending on number of throws. (See
Connector Pinout page)
For additional options, please contact factory.
**1 D-Sub Connectors is standard configuration on all models unless
otherwise specified
© 2013 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
CCT-39S/Page 1
CCT-39S\072013\Q3