5秒后页面跳转
CC1120RHMT PDF预览

CC1120RHMT

更新时间: 2024-02-13 21:09:14
品牌 Logo 应用领域
德州仪器 - TI 射频
页数 文件大小 规格书
30页 966K
描述
High Performance RF Transceiver for Narrowband Systems

CC1120RHMT 技术参数

是否无铅: 含铅是否Rohs认证: 符合
生命周期:Obsolete零件包装代码:QFN
包装说明:HVQCCN, LCC32,.2SQ,20针数:32
Reach Compliance Code:unknownECCN代码:5A991.B
HTS代码:8542.39.00.01风险等级:8.59
JESD-30 代码:S-PQCC-N32JESD-609代码:e4
长度:5 mm湿度敏感等级:3
功能数量:1端子数量:32
最高工作温度:85 °C最低工作温度:-40 °C
封装主体材料:PLASTIC/EPOXY封装代码:HVQCCN
封装等效代码:LCC32,.2SQ,20封装形状:SQUARE
封装形式:CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度(摄氏度):260
电源:3 V认证状态:Not Qualified
座面最大高度:0.9 mm子类别:Other Telecom ICs
标称供电电压:3 V表面贴装:YES
电信集成电路类型:TELECOM CIRCUIT温度等级:INDUSTRIAL
端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)端子形式:NO LEAD
端子节距:0.5 mm端子位置:QUAD
处于峰值回流温度下的最长时间:NOT SPECIFIED宽度:5 mm

CC1120RHMT 数据手册

 浏览型号CC1120RHMT的Datasheet PDF文件第2页浏览型号CC1120RHMT的Datasheet PDF文件第3页浏览型号CC1120RHMT的Datasheet PDF文件第4页浏览型号CC1120RHMT的Datasheet PDF文件第5页浏览型号CC1120RHMT的Datasheet PDF文件第6页浏览型号CC1120RHMT的Datasheet PDF文件第7页 
CC1120  
High Performance RF Transceiver for Narrowband Systems  
Applications  
Power Supply  
Narrowband ultra low power wireless systems with  
channel spacing down to 12.5 kHz  
170 / 433 / 868 / 915 / 950 MHz ISM/SRD band  
Wireless Metering and Wireless Smart Grid (AMR and  
AMI)  
o
o
Wide supply voltage range (2.0 V – 3.6 V)  
Low current consumption:  
-
-
-
RX: 3.7 mA in RX Sniff Mode  
RX: 17 mA peak current in low power mode  
IEEE 802.15.4g systems  
Home and building automation  
RX: 22 mA peak current in high  
performance mode  
Wireless alarm and security systems  
Industrial monitoring and control  
Wireless healthcare applications  
Wireless sensor networks and Active RFID  
Private mobile radio  
-
TX: 45 mA at +14 dBm  
o
Power down: 0.3 A  
Programmable output power up to +16 dBm with 0.4  
dB step size  
Automatic output power ramping  
Configurable data rates: 0 to 200 kbps  
Regulations  
Supported modulation formats: 2-FSK, 2- GFSK, 4-  
FSK, 4-GFSK, MSK, OOK  
Suitable for systems targeting compliance with:  
Advanced digital signal processing for improved sync  
detect performance  
Europe  
US  
ETSI EN 300 220  
ETSI EN 54-25  
RoHS compliant 5x5mm QFN 32 package  
FCC CFR47 Part 15  
FCC CFR47 Part 90, 24 and 101  
Japan  
ARIB RCR STD-T30  
ARIB STD-T67  
Peripherals and Support Functions  
Enhanced Wake-On-Radio functionality for automatic  
low-power receive polling  
ARIB STD-T96  
Separate 128-byte RX and TX FIFOs  
Key Features  
Includes functions for antenna diversity support  
Support for re-transmissions  
High performance single chip transceiver  
o
Adjacent channel selectivity: 64 dB at 12.5 kHz  
offset  
Support for auto-acknowledge of received packets  
TCXO support and control, also in power modes  
o
o
Blocking performance: 91 dB at 10 MHz offset  
Automatic Clear Channel Assessment (CCA) for listen-  
before-talk (LBT) systems  
Excellent receiver sensitivity:  
-123 dBm at 1.2 kbps  
Built in coding gain support for increased range and  
robustness  
-110 dBm at 50 kbps  
-127 dBm using built-in coding gain  
Digital RSSI measurement  
o
Very low phase noise: -111 dBc/Hz at 10 kHz  
offset  
Support for seamless integration with the CC1190 for  
increased range giving up to 3 dB improvement in  
sensitivity and up to +27 dBm output power  
Suitable for systems targeting ETSI cat. 1 compliance  
in 169 MHz and 433 MHz bands  
High spectral efficiency (9.6 kbps in 12.5 kHz channel  
in compliance with FCC narrowbanding mandate)  
Description  
The CC1120 is  
a fully integrated single-chip radio  
transceiver designed for high performance at very low  
power and low voltage operation in cost effective wireless  
systems. All filters are integrated, removing the need for  
costly external SAW and IF filters. The device is mainly  
intended for the ISM (Industrial, Scientific and Medical)  
and SRD (Short Range Device) frequency bands at 164-  
192 MHz, 410-480 MHz and 820-960 MHz.  
The CC1120 provides extensive hardware support for  
packet handling, data buffering, burst transmissions, clear  
channel assessment, link quality indication and Wake-On-  
Radio. The CC1120 main operating parameters can be  
controlled via an SPI interface. In a typical system, the  
CC1120 will be used together with a microcontroller and  
only few external passive components.  
PRODUCTION DATA information is current as of publication date. Products conform to  
specifications per the terms of Texas Instruments standard warranty. Production processing does  
not necessarily include testing of all parameters.  
SWRS112 – REVISED AUGUST 2011  
Page 1 of 23  

与CC1120RHMT相关器件

型号 品牌 描述 获取价格 数据表
CC1121 TI High Performance Low Power RF Transceiver

获取价格

CC1-121-GA RCD Fixed Resistor, Carbon Composition, 1W, 120ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole

获取价格

CC1-121-GAW RCD Fixed Resistor, Carbon Composition, 1W, 120ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole

获取价格

CC1-121-GBQ RCD Fixed Resistor, Carbon Composition, 1W, 120ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole

获取价格

CC1-121-GBW RCD Fixed Resistor, Carbon Composition, 1W, 120ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole

获取价格

CC1-121-GTW RCD Fixed Resistor, Carbon Composition, 1W, 120ohm, 500V, 2% +/-Tol, 1500ppm/Cel, Through Hole

获取价格