CAT4134
500mA Dual Channel Movie/Flash LED
Driver
FEATURES
DESCRIPTION
The CAT4134 is a high power, dual channel boost
converter which provides two matched LED currents.
Output current levels are controlled by one of two
resistors RSET or RFLASH. When the FLASH input pin
is low (movie mode), RSET sets the current. When
FLASH is high (flash mode), the resistor RFLASH sets
the LED current. Each channel drives two or three white
LEDs in series and provides a regulated current to
control their brightness. Input supply down to 3V is
supported, making the device ideal for Li-Ion battery
applications.
Dual Mode (Movie or Flash) operation
Independent Movie/Flash LED current control
Can drive 2, 3, 4 or 6 LEDs
High LED Current (250mA max per channel)
Power efficiency up to 85%
Dual frequency mode 1.2MHz and 900kHz
Soft-start inrush current
Adjustable overvoltage protection
Thermal shutdown protection
Operating temperature range -40ºC to +85ºC
12-pad TDFN 3mm x 3mm package
High frequency low noise operation allows the device to
be used with small external inductors and ceramic
capacitors while still maintaining excellent efficiency.
When not in use the device can be placed into a “zero”
quiescent mode via the shutdown pin.
APPLICATIONS
Camera flash
Flash light
In addition to soft-start control and current limiting, the
CAT4134 include thermal shutdown protection. A
dedicated overvoltage pin (OVP) allows the user to limit
the maximum LED supply voltage. The device is
packaged in the 12-pad TDFN 3mm x 3mm.
High-power white LEDs
Digital still cameras
Color LCD backlighting
ORDERING INFORMATION
Quantity Package
Part Number
Package per Reel Marking
For Ordering Information details, see page 12.
CAT4134HV2-T2
CAT4134HV2-GT2 TDFN-12 (2)
TDFN-12 (1)
2,000
2,000
HAAS
HAAU
Notes: (1) Matte-Tin Plated Finish (RoHS-compliant).
(2) NiPdAu Plated Finish (RoHS-compliant).
TYPICAL APPLICATION CIRCUIT
PIN CONFIGURATION
L
D
12-Pad TDFN 3mm x 3mm
Top View
VIN
VOUT
22µH
C1
C2
3V to 4.2V
1
2
3
4
5
6
12
11
10
9
FLASH
EN
OVP
SW
10µF
10µF
SW
VIN
EN
R1
PGND
AGND
LED2
LED1
SW
TAB is GND
1MΩ
VIN
CAT4134
OFF ON
FLASH
RFLASH
RSET
LED1
LED2
OVP
RSET
RFLASH
8
7
RFLASH
RSET
R2
18kΩ
20kΩ
100kΩ
L = Sumida CDRH3D16-220
D = Central CMDSH05-4 (500mA)
C2 = 10µF (rated 16V)
AGND
PGND
Catalyst Semiconductor, Inc.
Characteristics subject to change without notice.
1
Doc. No. MD-5021 Rev. B