CAT705, CAT706, CAT813
µP Supervisory Circuits
FEATURES
DESCRIPTION
n Reset guaranteed valid for 1.0 V VCC
n 6µA supply current
The CAT705, CAT706, and CAT813 provide reset and
monitoring functions for the electronic systems. Each
device monitors the system voltage and maintains a
reset output until that voltage reaches the device’s
specified trip value and then maintains the reset
output active condition until the device’s internal timer
allows the system power supply to stabilize.
n 200ms Reset pulse width
n Watchdog timer function 1.6s timeout
n Accurate brownout detection reset in 3.0, 3.6,
and 5.0 volt systems
The devices have a watchdog input which can be
n Secondary low supply monitoring on PFI input
¯¯¯¯
used to monitor a system signal and causes WDO to
n Pin and function compatible with the
go low if the signal fails to change state prior to a
timeout condition.
MAX705/MAX706/MAX813L products
n Operating Range from -40°C to +85°C
¯¯¯
The supervisory circuits provide a MR input which
initiates a reset if pulled low. The CAT705 and
n RoHS Compliant SOIC 8-lead and MSOP 8-lead
¯¯¯¯¯¯
CAT706 provide an active low RESET output. The
packages
CAT813 provides an active high RESET output.
APPLICATIONS
There is a secondary supply monitor (PFI) included for
power-fail warning.
n Microprocessor and microcontroller based
systems
n Instrument and control systems
n Portable equipment
For Ordering Information details, see page 13.
PIN FUNCTIONS
PIN CONFIGURATION
Pin Name Function
SOIC 8-Lead
¯¯¯
MR
Manual Reset Input
Power Supply
1
8
MR
WDO
VCC
GND
PFI
7
2
RESET
(RESET for CAT813)
V
CC
Ground
GND
3
4
6
5
WDI
PFO
Power Fail voltage monitor Input.
Power Fail Output
Watchdog Timer Input
¯¯¯¯
PFO
PFI
WDI
MSOP 8-Lead
CMOS Push-Pull Active Low Reset
Output (CAT705 & CAT706)
¯¯¯¯¯¯
RESET
1
8
RESET
(RESET for CAT813)
WDI
PFO
CMOS Push-Pull Active High Reset
Output (CAT813)
7
2
WDO
MR
RESET
3
4
6
5
PFI
¯¯¯¯¯
WDO
Watchdog Timer Output
GND
V
CC
© 2010 SCILLC. All rights reserved.
Characteristics subject to change without notice
1
Doc. No. MD-3030, Rev. D